Subject: [PATCH 3/3] [POWERPC] MPC8349E-mITX: Vitesse 7385 PHY is not connected to the MDIO bus

From: Vitaly Bordug <[email-masked]>
Date: Fri, 07 Dec 2007 01:51:39 +0300

...thus use fixed-link to register proper "Fixed PHY"

Signed-off-by: Anton Vorontsov <[email-masked]>
Signed-off-by: Vitaly Bordug <[email-masked]>

---

 arch/powerpc/boot/dts/mpc8349emitx.dts |   11 ++---------
 1 files changed, 2 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 5072f6d..877ee6d 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -115,14 +115,6 @@
 				reg = <1c>;
 				device_type = "ethernet-phy";
 			};
-
-			/* Vitesse 7385 */
-			phy1f: ethernet-phy@1f {
-				interrupt-parent = < &ipic >;
-				interrupts = <12 8>;
-				reg = <1f>;
-				device_type = "ethernet-phy";
-			};
 		};
 
 		ethernet@24000 {
@@ -159,7 +151,8 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <23 8 24 8 25 8>;
 			interrupt-parent = < &ipic >;
-			phy-handle = < &phy1f >;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 d#1000 0 0>;
 			linux,network-index = <1>;
 		};