Subject: [net-next PATCH 05/11] ixgbe: fix bug with napi add before request_irq

From: Jeff Kirsher <[email-masked]>
Date: Sat, 14 Mar 2009 01:13:49 -0700

From: Jesse Brandeburg <[email-masked]>

Occasionally if the driver was loaded in a system that
didn't support MSI-X or MSI and was on a shared interrupt,
the driver would then panic in NAPI on the first shared
interrupt because we hadn't called napi_add yet.

Solution: call napi_add before calling request_irq

Signed-off-by: Jesse Brandeburg <[email-masked]>
Signed-off-by: Peter P Waskiewicz Jr <[email-masked]>
Signed-off-by: Jeff Kirsher <[email-masked]>
---

 drivers/net/ixgbe/ixgbe_main.c |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 78cc517..4a2a769 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2339,8 +2339,6 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	else
 		ixgbe_configure_msi_and_legacy(adapter);
 
-	ixgbe_napi_add_all(adapter);
-
 	clear_bit(__IXGBE_DOWN, &adapter->state);
 	ixgbe_napi_enable_all(adapter);
 
@@ -2397,6 +2395,8 @@ int ixgbe_up(struct ixgbe_adapter *adapter)
 	/* hardware has been reset, we need to reload some things */
 	ixgbe_configure(adapter);
 
+	ixgbe_napi_add_all(adapter);
+
 	return ixgbe_up_complete(adapter);
 }
 
@@ -3426,6 +3426,8 @@ static int ixgbe_open(struct net_device *netdev)
 
 	ixgbe_configure(adapter);
 
+	ixgbe_napi_add_all(adapter);
+
 	err = ixgbe_request_irq(adapter);
 	if (err)
 		goto err_req_irq;
@@ -3480,6 +3482,7 @@ static int ixgbe_close(struct net_device *netdev)
 /**
  * ixgbe_napi_add_all - prep napi structs for use
  * @adapter: private struct
+ *
  * helper function to napi_add each possible q_vector->napi
  */
 void ixgbe_napi_add_all(struct ixgbe_adapter *adapter)
@@ -3552,7 +3555,6 @@ static int ixgbe_resume(struct pci_dev *pdev)
 		return err;
 	}
 
-	ixgbe_napi_add_all(adapter);
 	ixgbe_reset(adapter);
 
 	if (netif_running(netdev)) {