Subject: [PATCH 10/11] ioc3-eth: convert to net_device_ops

From: Alexander Beregalov <[email-masked]>
Date: Sat, 11 Apr 2009 21:44:55 +0400

Signed-off-by: Alexander Beregalov <[email-masked]>
---

 drivers/net/ioc3-eth.c |   22 ++++++++++++++--------
 1 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index cbc63ff..c5593f4 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1214,6 +1214,19 @@ static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
 }
 #endif
 
+static const struct net_device_ops ioc3_netdev_ops = {
+	.ndo_open		= ioc3_open,
+	.ndo_stop		= ioc3_close,
+	.ndo_start_xmit		= ioc3_start_xmit,
+	.ndo_tx_timeout		= ioc3_timeout,
+	.ndo_get_stats		= ioc3_get_stats,
+	.ndo_set_multicast_list	= ioc3_set_multicast_list,
+	.ndo_do_ioctl		= ioc3_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= ioc3_set_mac_address,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 static int __devinit ioc3_probe(struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
@@ -1310,15 +1323,8 @@ static int __devinit ioc3_probe(struct pci_dev *pdev,
 	ioc3_get_eaddr(ip);
 
 	/* The IOC3-specific entries in the device structure. */
-	dev->open		= ioc3_open;
-	dev->hard_start_xmit	= ioc3_start_xmit;
-	dev->tx_timeout		= ioc3_timeout;
 	dev->watchdog_timeo	= 5 * HZ;
-	dev->stop		= ioc3_close;
-	dev->get_stats		= ioc3_get_stats;
-	dev->do_ioctl		= ioc3_ioctl;
-	dev->set_multicast_list	= ioc3_set_multicast_list;
-	dev->set_mac_address	= ioc3_set_mac_address;
+	dev->netdev_ops		= &ioc3_netdev_ops;
 	dev->ethtool_ops	= &ioc3_ethtool_ops;
 	dev->features		= NETIF_F_IP_CSUM;