Subject: [net-next PATCH 1/3] ixgbe: Fix isues while reporting 8259x backplane link capabilities

From: Jeff Kirsher <[email-masked]>
Date: Tue, 25 Aug 2009 07:47:11 -0700

From: Mallikarjuna R Chilakala <[email-masked]>

Fix ethtool get_settings logic to report 10G & 1G advertised and
supported link modes in all 8259x 10G backplane connection types
except for 82598EB BX network connection type.

Signed-off-by: Mallikarjuna R Chilakala <[email-masked]>
Acked-by: Peter P Waskiewicz Jr <[email-masked]>
Signed-off-by: Jeff Kirsher <[email-masked]>
---

 drivers/net/ixgbe/ixgbe_ethtool.c |   19 ++++++++-----------
 1 files changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index dd221bb..1444ec5 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -169,23 +169,20 @@ static int ixgbe_get_settings(struct net_device *netdev,
 		}
 	} else if (hw->phy.media_type == ixgbe_media_type_backplane) {
 		/* Set as FIBRE until SERDES defined in kernel */
-		switch (hw->device_id) {
-		case IXGBE_DEV_ID_82598:
-			ecmd->supported |= (SUPPORTED_1000baseT_Full |
-				SUPPORTED_FIBRE);
-			ecmd->advertising = (ADVERTISED_10000baseT_Full |
-				ADVERTISED_1000baseT_Full |
-				ADVERTISED_FIBRE);
-			ecmd->port = PORT_FIBRE;
-			break;
-		case IXGBE_DEV_ID_82598_BX:
+		if (hw->device_id == IXGBE_DEV_ID_82598_BX) {
 			ecmd->supported = (SUPPORTED_1000baseT_Full |
 					   SUPPORTED_FIBRE);
 			ecmd->advertising = (ADVERTISED_1000baseT_Full |
 					     ADVERTISED_FIBRE);
 			ecmd->port = PORT_FIBRE;
 			ecmd->autoneg = AUTONEG_DISABLE;
-			break;
+		} else {
+			ecmd->supported |= (SUPPORTED_1000baseT_Full |
+					    SUPPORTED_FIBRE);
+			ecmd->advertising = (ADVERTISED_10000baseT_Full |
+					     ADVERTISED_1000baseT_Full |
+					     ADVERTISED_FIBRE);
+			ecmd->port = PORT_FIBRE;
 		}
 	} else {
 		ecmd->supported |= SUPPORTED_FIBRE;