Subject: Re: [PATCH v3] sky2: receive dma mapping error handling

From: Jarek Poplawski <[email-masked]>
Date: Mon, 1 Feb 2010 23:46:39 +0100

On Mon, Feb 01, 2010 at 02:29:42PM -0800, Stephen Hemminger wrote:
> On Mon, 1 Feb 2010 22:27:41 +0100
> Jarek Poplawski <[email-masked]> wrote:
> 
> > @@ -1038,13 +1035,14 @@ static void tx_init(struct sky2_port *sky2)
> >  {
> >  	struct sky2_tx_le *le;
> >  
> > -	sky2->tx_prod = sky2->tx_cons = 0;
> > +	sky2->tx_prod = 0;
> >  	sky2->tx_tcpsum = 0;
> >  	sky2->tx_last_mss = 0;
> >  
> >  	le = get_tx_le(sky2, &sky2->tx_prod);
> >  	le->addr = 0;
> >  	le->opcode = OP_ADDR64 | HW_OWNER;
> > +	sky2->tx_cons = sky2->tx_prod;
> >  	sky2->tx_last_upper = 0;
> >  }
> 
> Your change causes the initial element to be skipped. I want
> it to goto the hardware. It makes sure the upper bits of the
> first request are set (0).

I thought "Send high bits if needed" part in sky2_xmit_frame() was
enough. If it's otherwise than my patch was wrong.

> 
> I don't see what was wrong with my fix.
> 
It's OK. Please, submit it instead of mine.

Thanks,
Jarek P.