From: "Peter Hüwe" <PeterHuewe@gmx•de>
To: Kernel Janitors <kernel-janitors@vger•kernel.org>
Cc: "Karsten Keil" <isdn@linux-pingi•de>,
"Andrew Morton" <akpm@linux-foundation•org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix•de>,
"David S. Miller" <davem@davemloft•net>,
"Tejun Heo" <tj@kernel•org>,
netdev@vger•kernel.org, linux-kernel@vger•kernel.org
Subject: [PATCH 20/25] mISDN: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
Date: Thu, 15 Jul 2010 21:04:07 +0200 [thread overview]
Message-ID: <201007152104.08458.PeterHuewe@gmx.de> (raw)
From: Peter Huewe <peterhuewe@gmx•de>
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx•de>
---
drivers/isdn/hardware/mISDN/mISDNinfineon.c | 39 +++++++++-----------------
1 files changed, 14 insertions(+), 25 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
index 4975976..d2dd61d 100644
--- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c
+++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
@@ -125,36 +125,25 @@ struct inf_hw {
#define PCI_SUB_ID_SEDLBAUER 0x01
static struct pci_device_id infineon_ids[] __devinitdata = {
- { PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA20,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_DIVA20},
- { PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA20_U,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_DIVA20U},
- { PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA201,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_DIVA201},
- { PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA202,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_DIVA202},
+ { PCI_VDEVICE(EICON, PCI_DEVICE_ID_EICON_DIVA20), INF_DIVA20 },
+ { PCI_VDEVICE(EICON, PCI_DEVICE_ID_EICON_DIVA20_U), INF_DIVA20U },
+ { PCI_VDEVICE(EICON, PCI_DEVICE_ID_EICON_DIVA201), INF_DIVA201 },
+ { PCI_VDEVICE(EICON, PCI_DEVICE_ID_EICON_DIVA202), INF_DIVA202 },
{ PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100,
PCI_SUBVENDOR_SEDLBAUER_PCI, PCI_SUB_ID_SEDLBAUER, 0, 0,
- INF_SPEEDWIN},
+ INF_SPEEDWIN },
{ PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100,
- PCI_SUBVENDOR_HST_SAPHIR3, PCI_SUB_ID_SEDLBAUER, 0, 0, INF_SAPHIR3},
- { PCI_VENDOR_ID_ELSA, PCI_DEVICE_ID_ELSA_MICROLINK,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_QS1000},
- { PCI_VENDOR_ID_ELSA, PCI_DEVICE_ID_ELSA_QS3000,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_QS3000},
- { PCI_VENDOR_ID_SATSAGEM, PCI_DEVICE_ID_SATSAGEM_NICCY,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_NICCY},
+ PCI_SUBVENDOR_HST_SAPHIR3, PCI_SUB_ID_SEDLBAUER, 0, 0, INF_SAPHIR3 },
+ { PCI_VDEVICE(ELSA, PCI_DEVICE_ID_ELSA_MICROLINK), INF_QS1000 },
+ { PCI_VDEVICE(ELSA, PCI_DEVICE_ID_ELSA_QS3000), INF_QS3000 },
+ { PCI_VDEVICE(SATSAGEM, PCI_DEVICE_ID_SATSAGEM_NICCY), INF_NICCY },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO, 0, 0,
- INF_SCT_1},
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_R685,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_GAZEL_R685},
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_R753,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_GAZEL_R753},
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_DJINN_ITOO,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_GAZEL_R753},
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_OLITEC,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_GAZEL_R753},
+ INF_SCT_1 },
+ { PCI_VDEVICE(PLX, PCI_DEVICE_ID_PLX_R685), INF_GAZEL_R685 },
+ { PCI_VDEVICE(PLX, PCI_DEVICE_ID_PLX_R753), INF_GAZEL_R753 },
+ { PCI_VDEVICE(PLX, PCI_DEVICE_ID_PLX_DJINN_ITOO), INF_GAZEL_R753 },
+ { PCI_VDEVICE(PLX, PCI_DEVICE_ID_PLX_OLITEC), INF_GAZEL_R753 },
{ }
};
MODULE_DEVICE_TABLE(pci, infineon_ids);
--
1.7.1
next reply other threads:[~2010-07-15 19:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-15 19:04 Peter Hüwe [this message]
2010-07-16 2:07 ` [PATCH 20/25] mISDN: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201007152104.08458.PeterHuewe@gmx.de \
--to=peterhuewe@gmx$(echo .)de \
--cc=akpm@linux-foundation$(echo .)org \
--cc=davem@davemloft$(echo .)net \
--cc=isdn@linux-pingi$(echo .)de \
--cc=kernel-janitors@vger$(echo .)kernel.org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=netdev@vger$(echo .)kernel.org \
--cc=tj@kernel$(echo .)org \
--cc=u.kleine-koenig@pengutronix$(echo .)de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox