Subject: Re: iwl rfkill suddenly dropped to hard block

From: "John W. Linville" <[email-masked]>
Date: Wed, 15 Dec 2010 15:11:27 -0500

Cc'ing linux-wireless and Wey-Yi...

To be honest, nearly every report of "suddenly my rfkill is stuck
on" is because the laptop has multiple rfkill keys, usually with
one of them a slider along the edge of the case.  In particular,
Thinkpads have such switches.  The slider gets accidently engaged
(possibly while the laptop is being transported or somesuch) and
suddenly wireless stops working.

Please check for the above.  If you are sure that isn't the case, then
please try to determine the last working kernel and do a bisection --
hopefully you don't have to go all the way back to 2.6.33!

Hth!

John

On Wed, Dec 15, 2010 at 10:56:52PM +0300, Evgeniy Polyakov wrote:
> Hi.
> 
> Yesterday the latest git kernel (as of 2 days pull + i915 drm fixes
> tree) decided to turn my iwl agn adapter off.
> rfkill says it is hard blocked. It worked pretty well for the last
> several days for sure, but there was a suspend/wakeup (unsuccessful
> because i915 did not flash the display).
> 
> With 2.6.33 kernel it worked for months (although without sound).
> Other (newer) stock kernels from FC13 do not turn on LCD.
> 
> My tree is at 63abf3eda, which likely comes from drm-fixes or
> drm-staging kernel tree, but it is just 2 or 3 commits ahead of vanilla
> HEAD, but the same happens with 2.6.33.3-85 kernel from FC13.
> 
> Attached full dmesg with iwlagn debug=127 and lspci -vvv -H1
> 
> Thank you.
> 
> -- 
> 	Evgeniy Polyakov

> Initializing cgroup subsys cpuset
> Initializing cgroup subsys cpu
> Linux version 2.6.37-rc5-mainline+ (zbr@gavana) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2) (GCC) ) #4 SMP Sat Dec 11 16:37:52 MSK 2010
> Command line: ro root=/dev/mapper/vg_gavana-lv_root rd_LVM_LV=vg_gavana/lv_root rd_LVM_LV=vg_gavana/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
>  BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 00000000db65f000 (usable)
>  BIOS-e820: 00000000db65f000 - 00000000db67f000 (ACPI data)
>  BIOS-e820: 00000000db67f000 - 00000000db76f000 (ACPI NVS)
>  BIOS-e820: 00000000db76f000 - 00000000dc000000 (reserved)
>  BIOS-e820: 00000000dde00000 - 00000000e0000000 (reserved)
>  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
>  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
>  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
>  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
>  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>  BIOS-e820: 0000000100000000 - 000000011c000000 (usable)
> NX (Execute Disable) protection: active
> DMI 2.6 present.
> DMI: 0T26D8/Latitude E4310, BIOS A04 08/10/2010
> e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> No AGP bridge found
> last_pfn = 0x11c000 max_arch_pfn = 0x400000000
> MTRR default type: uncachable
> MTRR fixed ranges enabled:
>   00000-9FFFF write-back
>   A0000-BFFFF uncachable
>   C0000-FFFFF write-protect
> MTRR variable ranges enabled:
>   0 base 000000000 mask F80000000 write-back
>   1 base 080000000 mask FC0000000 write-back
>   2 base 0C0000000 mask FE0000000 write-back
>   3 base 0DC000000 mask FFC000000 uncachable
>   4 base 100000000 mask FE0000000 write-back
>   5 base 11C000000 mask FFC000000 uncachable
>   6 disabled
>   7 disabled
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> original variable MTRRs
> reg 0, base: 0GB, range: 2GB, type WB
> reg 1, base: 2GB, range: 1GB, type WB
> reg 2, base: 3GB, range: 512MB, type WB
> reg 3, base: 3520MB, range: 64MB, type UC
> reg 4, base: 4GB, range: 512MB, type WB
> reg 5, base: 4544MB, range: 64MB, type UC
> total RAM covered: 3968M
> Found optimal setting for mtrr clean up
>  gran_size: 64K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 0G
> New variable MTRRs
> reg 0, base: 0GB, range: 2GB, type WB
> reg 1, base: 2GB, range: 1GB, type WB
> reg 2, base: 3GB, range: 512MB, type WB
> reg 3, base: 3520MB, range: 64MB, type UC
> reg 4, base: 4GB, range: 512MB, type WB
> reg 5, base: 4544MB, range: 64MB, type UC
> e820 update range: 00000000dc000000 - 0000000100000000 (usable) ==> (reserved)
> last_pfn = 0xdb65f max_arch_pfn = 0x400000000
> found SMP MP-table at [ffff8800000f2280] f2280
> initial memory mapped : 0 - 20000000
> init_memory_mapping: 0000000000000000-00000000db65f000
>  0000000000 - 00db600000 page 2M
>  00db600000 - 00db65f000 page 4k
> kernel direct mapping tables up to db65f000 @ 1fffa000-20000000
> init_memory_mapping: 0000000100000000-000000011c000000
>  0100000000 - 011c000000 page 2M
> kernel direct mapping tables up to 11c000000 @ db659000-db65f000
> RAMDISK: 373a7000 - 37ff0000
> ACPI: RSDP 00000000000fe300 00024 (v02 DELL  )
> ACPI: XSDT 00000000db67de18 0005C (v01 DELL    E2      06222004 MSFT 00010013)
> ACPI: FACP 00000000db75fc18 000F4 (v04 DELL    E2      06222004 MSFT 00010013)
> ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369)
> ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40, using 32 (20101013/tbfadt-486)
> ACPI: DSDT 00000000db750018 09760 (v01 DELL    E2      00001001 INTL 20080729)
> ACPI: FACS 00000000db76bf40 00040
> ACPI: APIC 00000000db67cf18 0008C (v02 DELL    E2      06222004 MSFT 00010013)
> ACPI: MCFG 00000000db76dd18 0003C (v01 A M I  GMCH945. 06222004 MSFT 00000097)
> ACPI: HPET 00000000db76dc98 00038 (v01 DELL    E2      00000001 ASL  00000061)
> ACPI: BOOT 00000000db76dc18 00028 (v01 DELL   E2       06222004 AMI  00010013)
> ACPI: SLIC 00000000db766818 00176 (v03 DELL    E2      06222004 MSFT 00010013)
> ACPI: SSDT 00000000db75e018 009F1 (v01  PmRef    CpuPm 00003000 INTL 20080729)
> ACPI: Local APIC address 0xfee00000
> No NUMA configuration found
> Faking a node at 0000000000000000-000000011c000000
> Initmem setup node 0 0000000000000000-000000011c000000
>   NODE_DATA [000000011bfec000 - 000000011bffffff]
>  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880117e00000-ffff88011b7fffff] on node 0
> Zone PFN ranges:
>   DMA      0x00000010 -> 0x00001000
>   DMA32    0x00001000 -> 0x00100000
>   Normal   0x00100000 -> 0x0011c000
> Movable zone start PFN for each node
> early_node_map[3] active PFN ranges
>     0: 0x00000010 -> 0x0000009a
>     0: 0x00000100 -> 0x000db65f
>     0: 0x00100000 -> 0x0011c000
> On node 0 totalpages: 1013225
>   DMA zone: 56 pages used for memmap
>   DMA zone: 6 pages reserved
>   DMA zone: 3916 pages, LIFO batch:0
>   DMA32 zone: 14280 pages used for memmap
>   DMA32 zone: 880279 pages, LIFO batch:31
>   Normal zone: 1568 pages used for memmap
>   Normal zone: 113120 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x8086a701 base: 0xfed00000
> SMP: Allowing 8 CPUs, 4 hotplug CPUs
> nr_irqs_gsi: 40
> PM: Registered nosave memory: 000000000009a000 - 000000000009b000
> PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
> PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> PM: Registered nosave memory: 00000000db65f000 - 00000000db67f000
> PM: Registered nosave memory: 00000000db67f000 - 00000000db76f000
> PM: Registered nosave memory: 00000000db76f000 - 00000000dc000000
> PM: Registered nosave memory: 00000000dc000000 - 00000000dde00000
> PM: Registered nosave memory: 00000000dde00000 - 00000000e0000000
> PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
> PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
> PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
> PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
> PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
> PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
> PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
> PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
> PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
> PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
> PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
> PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
> PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
> PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
> Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
> Booting paravirtualized kernel on bare hardware
> setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
> PERCPU: Embedded 28 pages/cpu @ffff8800db400000 s82752 r8192 d23744 u262144
> pcpu-alloc: s82752 r8192 d23744 u262144 alloc=1*2097152
> pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
> Built 1 zonelists in Node order, mobility grouping on.  Total pages: 997315
> Policy zone: Normal
> Kernel command line: ro root=/dev/mapper/vg_gavana-lv_root rd_LVM_LV=vg_gavana/lv_root rd_LVM_LV=vg_gavana/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
> PID hash table entries: 4096 (order: 3, 32768 bytes)
> Checking aperture...
> No AGP bridge found
> Calgary: detecting Calgary via BIOS EBDA area
> Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> Memory: 3899920k/4653056k available (4454k kernel code, 600156k absent, 152980k reserved, 7041k data, 924k init)
> SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> Hierarchical RCU implementation.
> 	RCU dyntick-idle grace-period acceleration is enabled.
> 	RCU-based detection of stalled CPUs is disabled.
> NR_IRQS:16640 nr_irqs:744 16
> Extended CMOS year: 2000
> Console: colour VGA+ 80x25
> console [tty0] enabled
> allocated 41943040 bytes of page_cgroup
> please try 'cgroup_disable=memory' option if you don't want memory cgroups
> hpet clockevent registered
> Fast TSC calibration using PIT
> spurious 8259A interrupt: IRQ7.
> Detected 2526.928 MHz processor.
> Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.85 BogoMIPS (lpj=2526928)
> pid_max: default: 32768 minimum: 301
> Security Framework initialized
> SELinux:  Initializing.
> SELinux:  Starting in permissive mode
> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Mount-cache hash table entries: 256
> Initializing cgroup subsys ns
> ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
> Initializing cgroup subsys cpuacct
> Initializing cgroup subsys memory
> Initializing cgroup subsys devices
> Initializing cgroup subsys freezer
> Initializing cgroup subsys blkio
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> mce: CPU supports 9 MCE banks
> CPU0: Thermal monitoring handled by SMI
> using mwait in idle threads.
> Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
> ... version:                3
> ... bit width:              48
> ... generic registers:      4
> ... value mask:             0000ffffffffffff
> ... max period:             000000007fffffff
> ... fixed-purpose events:   3
> ... event mask:             000000070000000f
> ACPI: Core revision 20101013
> ftrace: allocating 21006 entries in 83 pages
> Setting APIC routing to flat
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
> CPU0: Intel(R) Core(TM) i5 CPU       M 540  @ 2.53GHz stepping 02
> Booting Node   0, Processors  #1
> CPU1: Thermal monitoring handled by SMI
>  #2
> CPU2: Thermal monitoring handled by SMI
>  #3
> CPU3: Thermal monitoring handled by SMI
> Brought up 4 CPUs
> Total of 4 processors activated (20215.06 BogoMIPS).
> devtmpfs: initialized
> Time: 19:04:46  Date: 12/15/10
> NET: Registered protocol family 16
> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> ACPI: bus type pci registered
> PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
> PCI: Using configuration type 1 for base access
> bio: create slab <bio-0> at 0
> ACPI: EC: Look up EC in DSDT
> [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> ACPI: SSDT 00000000db7ea918 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20080729)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT           (null) 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20080729)
> ACPI: SSDT 00000000db7e8018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20080729)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20080729)
> ACPI: SSDT 00000000db7e9a98 00303 (v01  PmRef    ApIst 00003000 INTL 20080729)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20080729)
> ACPI: SSDT 00000000db7e7d98 00119 (v01  PmRef    ApCst 00003000 INTL 20080729)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20080729)
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
> ACPI: No dock devices found.
> PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> \_SB_.PCI0:_OSC invalid UUID
> _OSC request data:1 8 1f 
> ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
> pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
> pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
> pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
> pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
> pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
> DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
> pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
> pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
> pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
> pci 0000:00:02.0: reg 20: [io  0x60b0-0x60b7]
> pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
> pci 0000:00:19.0: reg 10: [mem 0xf5400000-0xf541ffff]
> pci 0000:00:19.0: reg 14: [mem 0xf5480000-0xf5480fff]
> pci 0000:00:19.0: reg 18: [io  0x6040-0x605f]
> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:19.0: PME# disabled
> pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
> pci 0000:00:1a.0: reg 10: [mem 0xf5470000-0xf54703ff]
> pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1a.0: PME# disabled
> pci 0000:00:1b.0: [8086:3b57] type 0 class 0x000403
> pci 0000:00:1b.0: reg 10: [mem 0xf5460000-0xf5463fff 64bit]
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1b.0: PME# disabled
> pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: PME# disabled
> pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.1: PME# disabled
> pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.2: PME# disabled
> pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
> pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.3: PME# disabled
> pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
> pci 0000:00:1d.0: reg 10: [mem 0xf5450000-0xf54503ff]
> pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.0: PME# disabled
> pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
> pci 0000:00:1f.0: [8086:3b0f] type 0 class 0x000601
> pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
> pci 0000:00:1f.2: reg 10: [io  0x6090-0x6097]
> pci 0000:00:1f.2: reg 14: [io  0x6080-0x6083]
> pci 0000:00:1f.2: reg 18: [io  0x6070-0x6077]
> pci 0000:00:1f.2: reg 1c: [io  0x6060-0x6063]
> pci 0000:00:1f.2: reg 20: [io  0x6020-0x603f]
> pci 0000:00:1f.2: reg 24: [mem 0xf5440000-0xf54407ff]
> pci 0000:00:1f.2: PME# supported from D3hot
> pci 0000:00:1f.2: PME# disabled
> pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
> pci 0000:00:1f.3: reg 10: [mem 0xf5430000-0xf54300ff 64bit]
> pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
> pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
> pci 0000:00:1f.6: reg 10: [mem 0xf5420000-0xf5420fff 64bit]
> pci 0000:00:1c.0: PCI bridge to [bus 01-01]
> pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
> pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf53fffff]
> pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:02:00.0: [8086:422c] type 0 class 0x000280
> pci 0000:02:00.0: reg 10: [mem 0xf2c00000-0xf2c01fff 64bit]
> pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:02:00.0: PME# disabled
> pci 0000:00:1c.1: PCI bridge to [bus 02-02]
> pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
> pci 0000:00:1c.1:   bridge window [mem 0xf2c00000-0xf3ffffff]
> pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
> pci 0000:03:00.0: reg 10: [mem 0xf1830000-0xf18300ff]
> pci 0000:03:00.0: supports D1 D2
> pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:03:00.0: PME# disabled
> pci 0000:00:1c.2: PCI bridge to [bus 03-03]
> pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
> pci 0000:00:1c.2:   bridge window [mem 0xf1800000-0xf2bfffff]
> pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:00:1c.3: PCI bridge to [bus 04-09]
> pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
> pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf17fffff]
> pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
> pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
> pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
> pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
> pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
> pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
> \_SB_.PCI0:_OSC invalid UUID
> _OSC request data:1 19 1f 
> ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
> pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
> pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
> pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
> pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
> pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
> pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> vgaarb: loaded
> SCSI subsystem initialized
> libata version 3.00 loaded.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: pci_cache_line_size set to 64 bytes
> reserve RAM buffer: 000000000009ac00 - 000000000009ffff 
> reserve RAM buffer: 00000000db65f000 - 00000000dbffffff 
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
> NetLabel:  protocols = UNLABELED CIPSOv4
> NetLabel:  unlabeled traffic allowed by default
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> Switching to clocksource tsc
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp 00:00: [bus 00-3e]
> pnp 00:00: [io  0x0000-0x0cf7 window]
> pnp 00:00: [io  0x0cf8-0x0cff]
> pnp 00:00: [io  0x0d00-0xffff window]
> pnp 00:00: [mem 0x000a0000-0x000bffff window]
> pnp 00:00: [mem 0x000c0000-0x000c3fff window]
> pnp 00:00: [mem 0x000c4000-0x000c7fff window]
> pnp 00:00: [mem 0x000c8000-0x000cbfff window]
> pnp 00:00: [mem 0x000cc000-0x000cffff window]
> pnp 00:00: [mem 0x000d0000-0x000d3fff window]
> pnp 00:00: [mem 0x000d4000-0x000d7fff window]
> pnp 00:00: [mem 0x000d8000-0x000dbfff window]
> pnp 00:00: [mem 0x000dc000-0x000dffff window]
> pnp 00:00: [mem 0x000e0000-0x000e3fff window]
> pnp 00:00: [mem 0x000e4000-0x000e7fff window]
> pnp 00:00: [mem 0x000e8000-0x000ebfff window]
> pnp 00:00: [mem 0x000ec000-0x000effff window]
> pnp 00:00: [mem 0x000f0000-0x000fffff window]
> pnp 00:00: [mem 0xe0000000-0xfeafffff window]
> pnp 00:00: [mem 0xfed40000-0xfed44fff window]
> pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
> pnp 00:01: [io  0x0000-0x001f]
> pnp 00:01: [io  0x0081-0x0091]
> pnp 00:01: [io  0x0093-0x009f]
> pnp 00:01: [io  0x00c0-0x00df]
> pnp 00:01: [dma 4]
> pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> pnp 00:02: [mem 0xff000000-0xffffffff]
> pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
> pnp 00:03: [mem 0xfed00000-0xfed003ff]
> pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
> pnp 00:04: [io  0x00f0]
> pnp 00:04: [irq 13]
> pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> pnp 00:05: [io  0x002e-0x002f]
> pnp 00:05: [io  0x004e-0x004f]
> pnp 00:05: [io  0x0061]
> pnp 00:05: [io  0x0063]
> pnp 00:05: [io  0x0065]
> pnp 00:05: [io  0x0067]
> pnp 00:05: [io  0x0070]
> pnp 00:05: [io  0x0080]
> pnp 00:05: [io  0x0092]
> pnp 00:05: [io  0x00b2-0x00b3]
> pnp 00:05: [io  0x0680-0x069f]
> pnp 00:05: [io  0x1000-0x1003]
> pnp 00:05: [io  0x1004-0x1013]
> pnp 00:05: [io  0xffff]
> pnp 00:05: [io  0x0400-0x047f]
> pnp 00:05: [io  0x0500-0x057f]
> pnp 00:05: [io  0x164e-0x164f]
> pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
> pnp 00:06: [io  0x0070-0x0077]
> pnp 00:06: [irq 8]
> pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> pnp 00:07: [io  0x0060]
> pnp 00:07: [io  0x0064]
> pnp 00:07: [irq 1]
> pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
> pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
> pnp 00:09: [irq 12]
> pnp 00:09: Plug and Play ACPI device, IDs DLL0410 PNP0f13 (active)
> pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
> pnp 00:0a: [mem 0xfed10000-0xfed13fff]
> pnp 00:0a: [mem 0xfed18000-0xfed18fff]
> pnp 00:0a: [mem 0xfed19000-0xfed19fff]
> pnp 00:0a: [mem 0xf8000000-0xfbffffff]
> pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
> pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
> pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
> pnp 00:0a: [mem 0xff000000-0xffffffff]
> pnp 00:0a: [mem 0xfee00000-0xfeefffff]
> pnp 00:0a: [mem 0xf54c0000-0xf54c0fff]
> pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> pnp 00:0b: [irq 23]
> pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
> pnp 00:0c: [bus 3f]
> pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
> pnp: PnP ACPI: found 13 devices
> ACPI: ACPI bus type pnp unregistered
> system 00:05: [io  0x0680-0x069f] has been reserved
> system 00:05: [io  0x1000-0x1003] has been reserved
> system 00:05: [io  0x1004-0x1013] has been reserved
> system 00:05: [io  0xffff] has been reserved
> system 00:05: [io  0x0400-0x047f] has been reserved
> system 00:05: [io  0x0500-0x057f] has been reserved
> system 00:05: [io  0x164e-0x164f] has been reserved
> system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
> system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
> system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
> system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
> system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
> system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
> system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
> system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
> system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
> system 00:0a: [mem 0xf54c0000-0xf54c0fff] has been reserved
> pci 0000:00:1c.0: BAR 15: assigned [mem 0xfe900000-0xfeafffff 64bit pref]
> pci 0000:00:1c.1: BAR 15: assigned [mem 0xfe700000-0xfe8fffff 64bit pref]
> pci 0000:00:1c.2: BAR 15: assigned [mem 0xfe500000-0xfe6fffff 64bit pref]
> pci 0000:00:1c.3: BAR 15: assigned [mem 0xfe300000-0xfe4fffff 64bit pref]
> pci 0000:00:1c.0: PCI bridge to [bus 01-01]
> pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
> pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf53fffff]
> pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfeafffff 64bit pref]
> pci 0000:00:1c.1: PCI bridge to [bus 02-02]
> pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
> pci 0000:00:1c.1:   bridge window [mem 0xf2c00000-0xf3ffffff]
> pci 0000:00:1c.1:   bridge window [mem 0xfe700000-0xfe8fffff 64bit pref]
> pci 0000:00:1c.2: PCI bridge to [bus 03-03]
> pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
> pci 0000:00:1c.2:   bridge window [mem 0xf1800000-0xf2bfffff]
> pci 0000:00:1c.2:   bridge window [mem 0xfe500000-0xfe6fffff 64bit pref]
> pci 0000:00:1c.3: PCI bridge to [bus 04-09]
> pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
> pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf17fffff]
> pci 0000:00:1c.3:   bridge window [mem 0xfe300000-0xfe4fffff 64bit pref]
> pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
> pci 0000:00:1e.0:   bridge window [io  disabled]
> pci 0000:00:1e.0:   bridge window [mem disabled]
> pci 0000:00:1e.0:   bridge window [mem pref disabled]
> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.0: setting latency timer to 64
> pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.1: setting latency timer to 64
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1c.2: setting latency timer to 64
> pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> pci 0000:00:1c.3: setting latency timer to 64
> pci 0000:00:1e.0: setting latency timer to 64
> pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
> pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
> pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff]
> pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
> pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf53fffff]
> pci_bus 0000:01: resource 2 [mem 0xfe900000-0xfeafffff 64bit pref]
> pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
> pci_bus 0000:02: resource 1 [mem 0xf2c00000-0xf3ffffff]
> pci_bus 0000:02: resource 2 [mem 0xfe700000-0xfe8fffff 64bit pref]
> pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
> pci_bus 0000:03: resource 1 [mem 0xf1800000-0xf2bfffff]
> pci_bus 0000:03: resource 2 [mem 0xfe500000-0xfe6fffff 64bit pref]
> pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
> pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf17fffff]
> pci_bus 0000:04: resource 2 [mem 0xfe300000-0xfe4fffff 64bit pref]
> pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
> pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
> pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:0a: resource 7 [mem 0xe0000000-0xfeafffff]
> NET: Registered protocol family 2
> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 524288 bind 65536)
> TCP reno registered
> UDP hash table entries: 2048 (order: 4, 65536 bytes)
> UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
> NET: Registered protocol family 1
> pci 0000:00:02.0: Boot video device
> PCI: CLS 64 bytes, default 64
> Trying to unpack rootfs image as initramfs...
> Freeing initrd memory: 12580k freed
> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> Placing 64MB software IO TLB between ffff8800d7400000 - ffff8800db400000
> software IO TLB at phys 0xd7400000 - 0xdb400000
> Simple Boot Flag at 0xf1 set to 0x1
> audit: initializing netlink socket (disabled)
> type=2000 audit(1292439886.925:1): initialized
> HugeTLB registered 2 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> msgmni has been set to 7641
> SELinux:  Registering netfilter hooks
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> \_SB_.PCI0:_OSC invalid UUID
> _OSC request data:1 0 1d 
> \_SB_.PCI0:_OSC invalid UUID
> _OSC request data:1 0 1d 
> \_SB_.PCI0:_OSC invalid UUID
> _OSC request data:1 0 1d 
> \_SB_.PCI0:_OSC invalid UUID
> _OSC request data:1 0 1d 
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> acpiphp: Slot [1] registered
> pci-stub: invalid id string ""
> ACPI: AC Adapter [AC] (off-line)
> input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> ACPI: Lid Switch [LID]
> input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> ACPI: Power Button [PBTN]
> input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> ACPI: Sleep Button [SBTN]
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> ACPI: Power Button [PWRF]
> ACPI: acpi_idle registered with cpuidle
> Monitor-Mwait will be used to enter C-1 state
> Monitor-Mwait will be used to enter C-2 state
> Monitor-Mwait will be used to enter C-3 state
> Non-volatile memory driver v1.3
> Linux agpgart interface v0.103
> agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
> agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
> agpgart-intel 0000:00:00.0: detected 32768K stolen memory
> ACPI: Battery Slot [BAT0] (battery present)
> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> ACPI: Battery Slot [BAT1] (battery absent)
> brd: module loaded
> loop: module loaded
> ahci 0000:00:1f.2: version 3.0
> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
> ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
> ahci 0000:00:1f.2: setting latency timer to 64
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 40
> ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 40
> ata3: DUMMY
> ata4: DUMMY
> ata5: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440300 irq 40
> ata6: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440380 irq 40
> Fixed MDIO Bus: probed
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> ehci_hcd 0000:00:1a.0: setting latency timer to 64
> ehci_hcd 0000:00:1a.0: EHCI Host Controller
> ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1a.0: debug port 2
> ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
> ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5470000
> ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.37-rc5-mainline+ ehci_hcd
> usb usb1: SerialNumber: 0000:00:1a.0
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 3 ports detected
> ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> ehci_hcd 0000:00:1d.0: setting latency timer to 64
> ehci_hcd 0000:00:1d.0: EHCI Host Controller
> ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> ehci_hcd 0000:00:1d.0: debug port 2
> ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
> ehci_hcd 0000:00:1d.0: irq 17, io mem 0xf5450000
> ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: EHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.37-rc5-mainline+ ehci_hcd
> usb usb2: SerialNumber: 0000:00:1d.0
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> uhci_hcd: USB Universal Host Controller Interface driver
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Warning: Keylock active.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> rtc_cmos 00:06: RTC can wake from S4
> rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: [email-masked]
> cpuidle: using governor ladder
> cpuidle: using governor menu
> input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> ip_tables: (C) 2000-2006 Netfilter Core Team
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> Registering the dns_resolver key type
> PM: Hibernation image not present or could not be loaded.
> IMA: No TPM chip found, activating TPM-bypass!
>   Magic number: 6:692:91
> rtc_cmos 00:06: setting system clock to 2010-12-15 19:04:47 UTC (1292439887)
> Initalizing network drop monitor service
> ata6: SATA link down (SStatus 0 SControl 300)
> ata5: SATA link down (SStatus 0 SControl 300)
> usb 1-1: new high speed USB device using ehci_hcd and address 2
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> ata2.00: ATAPI: MATSHITA DVD+/-RW UJ892, 1.04, max UDMA/100
> ata1.00: ATA-7: SAMSUNG SSD PM800 2.5" 256GB, VBM24D1Q, max UDMA/100
> ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> ata1.00: configured for UDMA/100
> scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SSD PM80 VBM2 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> ata2.00: configured for UDMA/100
>  sda: sda1 sda2
> sd 0:0:0:0: [sda] Attached SCSI disk
> usb 1-1: New USB device found, idVendor=8087, idProduct=0020
> usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> hub 1-1:1.0: USB hub found
> scsi 1:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ892    1.04 PQ: 0 ANSI: 5
> hub 1-1:1.0: 6 ports detected
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> cdrom: Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> Freeing unused kernel memory: 924k freed
> Write protecting the kernel read-only data: 10240k
> Freeing unused kernel memory: 1672k freed
> Freeing unused kernel memory: 1944k freed
> dracut: dracut-005-5.fc13
> dracut: rd_NO_LUKS: removing cryptoluks activation
> udev: starting version 153
> udevd (104): /proc/104/oom_adj is deprecated, please use /proc/104/oom_score_adj instead.
> usb 2-1: new high speed USB device using ehci_hcd and address 2
> [drm] Initialized drm 1.1.0 20060810
> i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> i915 0000:00:02.0: setting latency timer to 64
> usb 2-1: New USB device found, idVendor=8087, idProduct=0020
> usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> hub 2-1:1.0: USB hub found
> hub 2-1:1.0: 8 ports detected
> i915 0000:00:02.0: irq 41 for MSI/MSI-X
> vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> fbcon: inteldrmfb (fb0) is primary device
> usb 1-1.4: new high speed USB device using ehci_hcd and address 3
> [drm:ironlake_crtc_enable] *ERROR* failed to enable transcoder 0
> Console: switching to colour frame buffer device 170x48
> fb0: inteldrmfb frame buffer device
> drm: registered panic notifier
> usb 1-1.4: New USB device found, idVendor=0461, idProduct=4db1
> usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 1-1.4: Product: Laptop_Integrated_Webcam_2M
> usb 1-1.4: Manufacturer: CN0F5CWW7866406901WQA00
> usb 2-1.8: new full speed USB device using ehci_hcd and address 3
> usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
> usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 2-1.8: Product: 5880
> usb 2-1.8: Manufacturer: Broadcom Corp
> usb 2-1.8: SerialNumber: 0123456789ABCD
> usb 2-1.8: config 0 descriptor??
> ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20101013/evregion-474)
> ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880113653be0), AE_TIME (20101013/psparse-537)
> ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR2] (Node ffff880113653c08), AE_TIME (20101013/psparse-537)
> ACPI Error: Method parse/execution failed [\ECRW] (Node ffff880113653d70), AE_TIME (20101013/psparse-537)
> ACPI Error: Method parse/execution failed [\ECG1] (Node ffff880113653dc0), AE_TIME (20101013/psparse-537)
> ACPI Error: Method parse/execution failed [\NEVT] (Node ffff880113655140), AE_TIME (20101013/psparse-537)
> ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff880113653bb8), AE_TIME (20101013/psparse-537)
> acpi device:38: registered as cooling_device4
> input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
> ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
> [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
> dracut: Starting plymouth daemon
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 1)
> sdhci-pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
> sdhci-pci 0000:03:00.0: setting latency timer to 64
> Registered led device: mmc0::
> mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
> dracut: Scanning devices sda2  for LVM logical volumes vg_gavana/lv_root vg_gavana/lv_swap 
> dracut: inactive '/dev/vg_gavana/lv_root' [50.00 GiB] inherit
> dracut: inactive '/dev/vg_gavana/lv_home' [182.22 GiB] inherit
> dracut: inactive '/dev/vg_gavana/lv_swap' [5.75 GiB] inherit
> EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
> dracut: Mounted root filesystem /dev/mapper/vg_gavana-lv_root
> dracut: Loading SELinux policy
> type=1404 audit(1292439892.295:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
> SELinux: 2048 avtab hash slots, 205638 rules.
> SELinux: 2048 avtab hash slots, 205638 rules.
> SELinux:  9 users, 13 roles, 3365 types, 175 bools, 1 sens, 1024 cats
> SELinux:  77 classes, 205638 rules
> SELinux:  Permission read_policy in class security not defined in policy.
> SELinux:  Permission audit_access in class file not defined in policy.
> SELinux:  Permission audit_access in class dir not defined in policy.
> SELinux:  Permission execmod in class dir not defined in policy.
> SELinux:  Permission audit_access in class lnk_file not defined in policy.
> SELinux:  Permission open in class lnk_file not defined in policy.
> SELinux:  Permission execmod in class lnk_file not defined in policy.
> SELinux:  Permission audit_access in class chr_file not defined in policy.
> SELinux:  Permission audit_access in class blk_file not defined in policy.
> SELinux:  Permission execmod in class blk_file not defined in policy.
> SELinux:  Permission audit_access in class sock_file not defined in policy.
> SELinux:  Permission execmod in class sock_file not defined in policy.
> SELinux:  Permission audit_access in class fifo_file not defined in policy.
> SELinux:  Permission execmod in class fifo_file not defined in policy.
> SELinux: the above unknown classes and permissions will be allowed
> SELinux:  Completing initialization.
> SELinux:  Setting up existing superblocks.
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev dm-0, type ext4), uses xattr
> type=1403 audit(1292439892.882:3): policy loaded auid=4294967295 ses=4294967295
> dracut: 
> dracut: Switching root
> readahead: starting
> udev: starting version 153
> type=1400 audit(1292439894.129:4): avc:  denied  { mmap_zero } for  pid=412 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
> iTCO_vendor_support: vendor-support=0
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
> iTCO_wdt: Found a QS57 TCO device (Version=2, TCOBASE=0x0460)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> input: PC Speaker as /devices/platform/pcspkr/input/input7
> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ACPI: resource 0000:00:1f.3 [io  0x6000-0x601f] conflicts with ACPI region SMBI [mem 0x00006000-0x0000600f disabled]
> ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> wmi: Mapper loaded
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
> e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
> e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
> e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> e1000e 0000:00:19.0: setting latency timer to 64
> e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
> input: Dell WMI hotkeys as /devices/virtual/input/input8
> microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
> microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
> microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
> microcode: Microcode Update Driver: v2.00 <[email-masked]>, Peter Oruba
> cfg80211: Calling CRDA to update world regulatory domain
> microcode: CPU0 updated to revision 0xc, date = 2010-06-10
> microcode: CPU1 updated to revision 0xc, date = 2010-06-10
> microcode: CPU2 updated to revision 0xc, date = 2010-06-10
> microcode: CPU3 updated to revision 0xc, date = 2010-06-10
> e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:b9:e0:54:fd
> e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
> e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 4041ff-0ff
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> ALSA sound/pci/hda/hda_codec.c:4619: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:4623:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:4627:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:4628:    mono: mono_out=0x0
> ALSA sound/pci/hda/hda_codec.c:4632:    inputs:
> ALSA sound/pci/hda/hda_codec.c:4638: 
> ALSA sound/pci/hda/patch_sigmatel.c:3042: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
> cfg80211: World regulatory domain updated:
>     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
> iwlagn: Copyright(c) 2003-2010 Intel Corporation
> iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> iwlagn 0000:02:00.0: setting latency timer to 64
> iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
> iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
> iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
> iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
> iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
> cfg80211: Calling CRDA for country: RU
> ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
> cfg80211: Regulatory domain changed to country: RU
>     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>     (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
> EXT4-fs (dm-0): re-mounted. Opts: (null)
> EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
> SELinux: initialized (dev sda1, type ext4), uses xattr
> EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
> SELinux: initialized (dev dm-2, type ext4), uses xattr
> Adding 6029308k swap on /dev/mapper/vg_gavana-lv_swap.  Priority:-1 extents:1 across:6029308k 
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
> e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
> fuse init (API version 7.15)
> SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
> wmi: Mapper unloaded
> iwlagn 0000:02:00.0: PCI INT A disabled
> iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
> iwlagn: Copyright(c) 2003-2010 Intel Corporation
> iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> iwlagn 0000:02:00.0: setting latency timer to 64
> iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
> iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
> iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
> iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
> iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
> ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs'
> iwlagn 0000:02:00.0: PCI INT A disabled
> iwlcore: Unknown parameter `debug'
> iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
> iwlagn: Copyright(c) 2003-2010 Intel Corporation
> ieee80211 phy2: U iwl_pci_probe *** LOAD DRIVER ***
> iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> iwlagn 0000:02:00.0: setting latency timer to 64
> ieee80211 phy2: U iwl_pci_probe pci_resource_len = 0x00002000
> ieee80211 phy2: U iwl_pci_probe pci_resource_base = ffffc90005b14000
> ieee80211 phy2: U iwl_hw_detect HW Revision ID = 0x35
> iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
> ieee80211 phy2: U iwl_prepare_card_hw iwl_prepare_card_hw enter
> ieee80211 phy2: U iwl_set_hw_ready hardware ready
> ieee80211 phy2: U iwl_eeprom_init NVM size = 2048
> ieee80211 phy2: U iwl_apm_init Init card's basic functions
> ieee80211 phy2: U iwl_eeprom_verify_signature EEPROM signature=0x00000001
> ieee80211 phy2: U iwl_eeprom_init NVM Type: OTP, version: 0x436
> ieee80211 phy2: U iwl_apm_stop Stop card, put in low power state
> ieee80211 phy2: U iwl_apm_stop_master stop master
> iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
> ieee80211 phy2: U iwl_pci_probe MAC address: 00:27:10:46:ad:04
> ieee80211 phy2: U iwlagn_set_rxon_chain rx_chain=0x240C active=2 idle=1
> ieee80211 phy2: U iwl_init_channel_map Initializing regulatory info from EEPROM
> ieee80211 phy2: U iwl_init_channel_map Parsing data for 56 channels.
> ieee80211 phy2: U iwl_init_channel_map Ch. 1 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 2 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 3 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 4 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 5 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 6 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 7 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 8 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 9 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 10 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 11 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 12 [2.4GHz] VALID WIDE (0x61 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 13 [2.4GHz] VALID WIDE (0x61 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 14 Flags 0 [2.4GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 183 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 184 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 185 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 187 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 188 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 189 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 192 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 196 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 7 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 8 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 11 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 12 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 16 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 34 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 36 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 38 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 40 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 42 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 44 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 46 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 48 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 52 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 56 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 60 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 64 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 100 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 104 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 108 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 112 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 116 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 120 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 124 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 128 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 132 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 136 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 140 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 145 Flags 0 [5.2GHz] - No traffic
> ieee80211 phy2: U iwl_init_channel_map Ch. 149 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 153 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 157 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 161 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_init_channel_map Ch. 165 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 1 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 2 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 3 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 4 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 8 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 9 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 10 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 36 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 40 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 44 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 48 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 52 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 56 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 60 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 64 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 100 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 104 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 108 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 112 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 116 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 120 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 124 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 128 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 132 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 136 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 149 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 153 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 157 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 161 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
> ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 15 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 14 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 13 dB chain_c: 12 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 13 dB chain_c: 12 dB mimo2: 11 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 3 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 4 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 5 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 6 - chain_a: 0 dB chain_b: 14 dB chain_c: 13 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 7 - chain_a: 0 dB chain_b: 13 dB chain_c: 12 dB mimo2: 11 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 9 dB chain_c: 9 dB mimo2: 8 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 11 dB chain_c: 11 dB mimo2: 9 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 11 dB chain_c: 11 dB mimo2: 9 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 3 - chain_a: 0 dB chain_b: 9 dB chain_c: 10 dB mimo2: 8 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 4 - chain_a: 0 dB chain_b: 14 dB chain_c: 13 dB mimo2: 11 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 15 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 15 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 3 - chain_a: 0 dB chain_b: 13 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 4 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 5 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 10 dB chain_c: 10 dB mimo2: 9 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 11 dB chain_c: 11 dB mimo2: 10 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 13 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 13 dB chain_c: 13 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 13 dB mimo2: 11 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 13 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB
> ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 11 dB mimo3: 0 dB
> ieee80211 phy2: U iwlcore_init_geos Channel 1 Freq=2412[2.4GHz] valid flag=0x20
> ieee80211 phy2: U iwlcore_init_geos Channel 2 Freq=2417[2.4GHz] valid flag=0x20
> ieee80211 phy2: U iwlcore_init_geos Channel 3 Freq=2422[2.4GHz] valid flag=0x20
> ieee80211 phy2: U iwlcore_init_geos Channel 4 Freq=2427[2.4GHz] valid flag=0x20
> ieee80211 phy2: U iwlcore_init_geos Channel 5 Freq=2432[2.4GHz] valid flag=0x0
> ieee80211 phy2: U iwlcore_init_geos Channel 6 Freq=2437[2.4GHz] valid flag=0x0
> ieee80211 phy2: U iwlcore_init_geos Channel 7 Freq=2442[2.4GHz] valid flag=0x0
> ieee80211 phy2: U iwlcore_init_geos Channel 8 Freq=2447[2.4GHz] valid flag=0x10
> ieee80211 phy2: U iwlcore_init_geos Channel 9 Freq=2452[2.4GHz] valid flag=0x10
> ieee80211 phy2: U iwlcore_init_geos Channel 10 Freq=2457[2.4GHz] valid flag=0x10
> ieee80211 phy2: U iwlcore_init_geos Channel 11 Freq=2462[2.4GHz] valid flag=0x10
> ieee80211 phy2: U iwlcore_init_geos Channel 12 Freq=2467[2.4GHz] valid flag=0x36
> ieee80211 phy2: U iwlcore_init_geos Channel 13 Freq=2472[2.4GHz] valid flag=0x36
> ieee80211 phy2: U iwlcore_init_geos Channel 36 Freq=5180[5.2GHz] valid flag=0x26
> ieee80211 phy2: U iwlcore_init_geos Channel 40 Freq=5200[5.2GHz] valid flag=0x16
> ieee80211 phy2: U iwlcore_init_geos Channel 44 Freq=5220[5.2GHz] valid flag=0x26
> ieee80211 phy2: U iwlcore_init_geos Channel 48 Freq=5240[5.2GHz] valid flag=0x16
> ieee80211 phy2: U iwlcore_init_geos Channel 52 Freq=5260[5.2GHz] valid flag=0x2E
> ieee80211 phy2: U iwlcore_init_geos Channel 56 Freq=5280[5.2GHz] valid flag=0x1E
> ieee80211 phy2: U iwlcore_init_geos Channel 60 Freq=5300[5.2GHz] valid flag=0x2E
> ieee80211 phy2: U iwlcore_init_geos Channel 64 Freq=5320[5.2GHz] valid flag=0x1E
> ieee80211 phy2: U iwlcore_init_geos Channel 100 Freq=5500[5.2GHz] valid flag=0x2E
> ieee80211 phy2: U iwlcore_init_geos Channel 104 Freq=5520[5.2GHz] valid flag=0x1E
> ieee80211 phy2: U iwlcore_init_geos Channel 108 Freq=5540[5.2GHz] valid flag=0x2E
> ieee80211 phy2: U iwlcore_init_geos Channel 112 Freq=5560[5.2GHz] valid flag=0x1E
> ieee80211 phy2: U iwlcore_init_geos Channel 116 Freq=5580[5.2GHz] valid flag=0x2E
> ieee80211 phy2: U iwlcore_init_geos Channel 120 Freq=5600[5.2GHz] valid flag=0x1E
> ieee80211 phy2: U iwlcore_init_geos Channel 124 Freq=5620[5.2GHz] valid flag=0x2E
> ieee80211 phy2: U iwlcore_init_geos Channel 128 Freq=5640[5.2GHz] valid flag=0x1E
> ieee80211 phy2: U iwlcore_init_geos Channel 132 Freq=5660[5.2GHz] valid flag=0x2E
> ieee80211 phy2: U iwlcore_init_geos Channel 136 Freq=5680[5.2GHz] valid flag=0x1E
> ieee80211 phy2: U iwlcore_init_geos Channel 140 Freq=5700[5.2GHz] valid flag=0x3E
> ieee80211 phy2: U iwlcore_init_geos Channel 149 Freq=5745[5.2GHz] valid flag=0x26
> ieee80211 phy2: U iwlcore_init_geos Channel 153 Freq=5765[5.2GHz] valid flag=0x16
> ieee80211 phy2: U iwlcore_init_geos Channel 157 Freq=5785[5.2GHz] valid flag=0x26
> ieee80211 phy2: U iwlcore_init_geos Channel 161 Freq=5805[5.2GHz] valid flag=0x16
> ieee80211 phy2: U iwlcore_init_geos Channel 165 Freq=5825[5.2GHz] valid flag=0x36
> iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
> iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
> ieee80211 phy2: U iwl_request_firmware attempting to load firmware 'iwlwifi-6000-4.ucode'
> ieee80211 phy2: U iwl_ucode_callback Loaded firmware file 'iwlwifi-6000-4.ucode' (454608 bytes).
> iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
> ieee80211 phy2: U iwl_ucode_callback f/w package hdr ucode version raw = 0x9dd0401
> ieee80211 phy2: U iwl_ucode_callback f/w package hdr runtime inst size = 145616
> ieee80211 phy2: U iwl_ucode_callback f/w package hdr runtime data size = 81920
> ieee80211 phy2: U iwl_ucode_callback f/w package hdr init inst size = 145124
> ieee80211 phy2: U iwl_ucode_callback f/w package hdr init data size = 81920
> ieee80211 phy2: U iwl_ucode_callback f/w package hdr boot inst size = 0
> ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) uCode instr len 145616
> ieee80211 phy2: U iwl_ucode_callback uCode instr buf vaddr = 0xffff8800c91c0000, paddr = 0xc91c0000
> ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) uCode data len 81920
> ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) init instr len 145124
> ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) init data len 81920
> ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) boot instr len 0
> ieee80211 phy2: Selected rate control algorithm 'iwl-agn-rs'
> 4: phy2: Wireless LAN
> 	Soft blocked: no
> 	Hard blocked: yes

> 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
> 	Subsystem: Dell Device 0410
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> 	Latency: 0
> 	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
> 
> 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
> 	Subsystem: Dell Device 0410
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: Memory at f0000000 (64-bit, non-prefetchable)
> 	Region 2: Memory at e0000000 (64-bit, prefetchable)
> 	Region 4: I/O ports at 60b0
> 	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
> 		Address: fee0500c  Data: 4169
> 	Capabilities: [d0] Power Management version 2
> 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [a4] PCI Advanced Features
> 		AFCap: TP+ FLR+
> 		AFCtrl: FLR-
> 		AFStatus: TP-
> 	Kernel modules: i915
> 
> 00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 05)
> 	Subsystem: Dell Device 0410
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0
> 	Interrupt: pin A routed to IRQ 5
> 	Region 0: Memory at f5400000 (32-bit, non-prefetchable)
> 	Region 1: Memory at f5480000 (32-bit, non-prefetchable)
> 	Region 2: I/O ports at 6040
> 	Capabilities: [c8] Power Management version 2
> 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> 	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> 		Address: 00000000fee0400c  Data: 41a1
> 	Capabilities: [e0] PCI Advanced Features
> 		AFCap: TP+ FLR+
> 		AFCtrl: FLR-
> 		AFStatus: TP-
> 	Kernel modules: e1000e
> 
> 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
> 	Subsystem: Dell Device 0410
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: Memory at f5470000 (32-bit, non-prefetchable)
> 	Capabilities: [50] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [58] Debug port: BAR=1 offset=00a0
> 	Capabilities: [98] PCI Advanced Features
> 		AFCap: TP+ FLR+
> 		AFCtrl: FLR-
> 		AFStatus: TP-
> 
> 00:1b.0 Audio device: Intel Corporation Device 3b57 (rev 05)
> 	Subsystem: Dell Device 0410
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0, Cache Line Size: 64 bytes
> 	Interrupt: pin A routed to IRQ 3
> 	Region 0: Memory at f5460000 (64-bit, non-prefetchable)
> 	Capabilities: [50] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
> 		Address: 00000000fee0500c  Data: 4189
> 	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
> 		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> 			ExtTag- RBE- FLReset+
> 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> 			MaxPayload 128 bytes, MaxReadReq 128 bytes
> 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> 		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
> 			ClockPM- Surprise- LLActRep- BwNot-
> 		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
> 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> 		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
> 	Kernel modules: snd-hda-intel
> 
> 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0, Cache Line Size: 64 bytes
> 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> 	I/O behind bridge: 00005000-00005fff
> 	Memory behind bridge: f4000000-f53fffff
> 	Prefetchable memory behind bridge: 00000000fe900000-00000000feafffff
> 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> 	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> 		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> 			ExtTag- RBE+ FLReset-
> 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> 			MaxPayload 128 bytes, MaxReadReq 128 bytes
> 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> 		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
> 			ClockPM- Surprise- LLActRep+ BwNot-
> 		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> 		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
> 			Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
> 		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> 			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> 		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> 			Changed: MRL- PresDet- LinkState-
> 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> 		RootCap: CRSVisible-
> 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> 		DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
> 		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
> 		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> 			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> 			 Compliance De-emphasis: -6dB
> 		LnkSta2: Current De-emphasis Level: -6dB
> 	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> 		Address: 00000000  Data: 0000
> 	Capabilities: [90] Subsystem: Dell Device 0410
> 	Capabilities: [a0] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> 	Kernel modules: shpchp
> 
> 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0, Cache Line Size: 64 bytes
> 	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> 	I/O behind bridge: 00004000-00004fff
> 	Memory behind bridge: f2c00000-f3ffffff
> 	Prefetchable memory behind bridge: 00000000fe700000-00000000fe8fffff
> 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> 	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> 		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> 			ExtTag- RBE+ FLReset-
> 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> 			MaxPayload 128 bytes, MaxReadReq 128 bytes
> 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> 		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
> 			ClockPM- Surprise- LLActRep+ BwNot-
> 		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
> 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> 		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> 		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
> 			Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
> 		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> 			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> 		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> 			Changed: MRL- PresDet+ LinkState+
> 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> 		RootCap: CRSVisible-
> 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> 		DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
> 		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
> 		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> 			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> 			 Compliance De-emphasis: -6dB
> 		LnkSta2: Current De-emphasis Level: -6dB
> 	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> 		Address: 00000000  Data: 0000
> 	Capabilities: [90] Subsystem: Dell Device 0410
> 	Capabilities: [a0] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> 	Kernel modules: shpchp
> 
> 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) (prog-if 00 [Normal decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0, Cache Line Size: 64 bytes
> 	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> 	I/O behind bridge: 00003000-00003fff
> 	Memory behind bridge: f1800000-f2bfffff
> 	Prefetchable memory behind bridge: 00000000fe500000-00000000fe6fffff
> 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> 	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> 		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> 			ExtTag- RBE+ FLReset-
> 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> 			MaxPayload 128 bytes, MaxReadReq 128 bytes
> 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> 		LnkCap:	Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
> 			ClockPM- Surprise- LLActRep+ BwNot-
> 		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
> 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> 		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> 		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
> 			Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
> 		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> 			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> 		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> 			Changed: MRL- PresDet+ LinkState+
> 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> 		RootCap: CRSVisible-
> 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> 		DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
> 		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
> 		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> 			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> 			 Compliance De-emphasis: -6dB
> 		LnkSta2: Current De-emphasis Level: -6dB
> 	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> 		Address: 00000000  Data: 0000
> 	Capabilities: [90] Subsystem: Dell Device 0410
> 	Capabilities: [a0] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> 	Kernel modules: shpchp
> 
> 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) (prog-if 00 [Normal decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0, Cache Line Size: 64 bytes
> 	Bus: primary=00, secondary=04, subordinate=09, sec-latency=0
> 	I/O behind bridge: 00002000-00002fff
> 	Memory behind bridge: f0400000-f17fffff
> 	Prefetchable memory behind bridge: 00000000fe300000-00000000fe4fffff
> 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> 	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> 		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> 			ExtTag- RBE+ FLReset-
> 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> 			MaxPayload 128 bytes, MaxReadReq 128 bytes
> 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> 		LnkCap:	Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
> 			ClockPM- Surprise- LLActRep+ BwNot-
> 		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> 		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
> 			Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
> 		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
> 			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> 		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> 			Changed: MRL- PresDet- LinkState-
> 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> 		RootCap: CRSVisible-
> 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> 		DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
> 		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
> 		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> 			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> 			 Compliance De-emphasis: -6dB
> 		LnkSta2: Current De-emphasis Level: -6dB
> 	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> 		Address: 00000000  Data: 0000
> 	Capabilities: [90] Subsystem: Dell Device 0410
> 	Capabilities: [a0] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> 	Kernel modules: shpchp
> 
> 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
> 	Subsystem: Dell Device 0410
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: Memory at f5450000 (32-bit, non-prefetchable)
> 	Capabilities: [50] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [58] Debug port: BAR=1 offset=00a0
> 	Capabilities: [98] PCI Advanced Features
> 		AFCap: TP+ FLR+
> 		AFCtrl: FLR-
> 		AFStatus: TP-
> 
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0
> 	Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
> 	I/O behind bridge: 0000f000-00000fff
> 	Memory behind bridge: fff00000-000fffff
> 	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> 	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> 	Capabilities: [50] Subsystem: Dell Device 0410
> 
> 00:1f.0 ISA bridge: Intel Corporation 5 Series/3400 Series Chipset LPC Interface Controller (rev 05)
> 	Subsystem: Dell Device 0410
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0
> 	Capabilities: [e0] Vendor Specific Information: Len=10 <?>
> 	Kernel modules: iTCO_wdt
> 
> 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
> 	Subsystem: Dell Device 0410
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0
> 	Interrupt: pin C routed to IRQ 10
> 	Region 0: I/O ports at 6090
> 	Region 1: I/O ports at 6080
> 	Region 2: I/O ports at 6070
> 	Region 3: I/O ports at 6060
> 	Region 4: I/O ports at 6020
> 	Region 5: Memory at f5440000 (32-bit, non-prefetchable)
> 	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> 		Address: fee0500c  Data: 4161
> 	Capabilities: [70] Power Management version 3
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
> 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
> 	Capabilities: [b0] PCI Advanced Features
> 		AFCap: TP+ FLR+
> 		AFCtrl: FLR-
> 		AFStatus: TP-
> 
> 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
> 	Subsystem: Dell Device 0410
> 	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Interrupt: pin C routed to IRQ 10
> 	Region 0: Memory at f5430000 (64-bit, non-prefetchable)
> 	Region 4: I/O ports at 6000
> 	Kernel modules: i2c-i801
> 
> 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
> 	Subsystem: Dell Device 0410
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0
> 	Interrupt: pin C routed to IRQ 10
> 	Region 0: Memory at f5420000 (64-bit, non-prefetchable)
> 	Capabilities: [50] Power Management version 3
> 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> 		Address: 00000000  Data: 0000
> 
> 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
> 	Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0, Cache Line Size: 64 bytes
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: Memory at f2c00000 (64-bit, non-prefetchable)
> 	Capabilities: [c8] Power Management version 3
> 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> 		Address: 00000000fee0f00c  Data: 41b1
> 	Capabilities: [e0] Express (v1) Endpoint, MSI 00
> 		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
> 			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
> 			MaxPayload 128 bytes, MaxReadReq 128 bytes
> 		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> 		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
> 			ClockPM+ Surprise- LLActRep- BwNot-
> 		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
> 			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> 		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 	Kernel modules: iwlagn
> 
> 03:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 01)
> 	Subsystem: Dell Device 0410
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 0, Cache Line Size: 64 bytes
> 	Interrupt: pin A routed to IRQ 10
> 	Region 0: Memory at f1830000 (32-bit, non-prefetchable)
> 	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> 		Address: 0000000000000000  Data: 0000
> 	Capabilities: [78] Power Management version 3
> 		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
> 	Capabilities: [80] Express (v1) Endpoint, MSI 00
> 		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
> 			ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
> 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> 			MaxPayload 128 bytes, MaxReadReq 512 bytes
> 		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> 		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
> 			ClockPM+ Surprise- LLActRep- BwNot-
> 		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
> 			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> 		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 	Kernel modules: sdhci-pci
> 

-- 
John W. Linville		Someday the world will need a hero, and you
[email-masked]			might be all we have.  Be ready.