From: Jiri Bohac <jbohac@suse•cz>
To: fubar@us•ibm.com, netdev@vger•kernel.org
Subject: [PATCH] bonding: fix enslaving in alb mode when link down
Date: Wed, 18 Jan 2012 23:24:54 +0100 [thread overview]
Message-ID: <20120118222454.GA11966@midget.suse.cz> (raw)
bond_alb_init_slave() is called from bond_enslave() and sets the slave's MAC
address. This is done differently for TLB and ALB modes.
bond->alb_info.rlb_enabled is used to discriminate between the two modes but
this flag may be uninitialized if the slave is being enslaved prior to calling
bond_open() -> bond_alb_initialize() on the master.
It turns out all the callers of alb_set_slave_mac_addr() pass
bond->alb_info.rlb_enabled as the hw parameter.
This patch cleans up the unnecessary parameter of alb_set_slave_mac_addr() and
makes the function decide based on the bonding mode instead, which fixes the
above problem.
Signed-off-by: Jiri Bohac <jbohac@suse•cz>
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 342626f..f820b26 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -909,16 +909,12 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[])
}
}
-/* hw is a boolean parameter that determines whether we should try and
- * set the hw address of the device as well as the hw address of the
- * net_device
- */
-static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[], int hw)
+static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[])
{
struct net_device *dev = slave->dev;
struct sockaddr s_addr;
- if (!hw) {
+ if (slave->bond->params.mode == BOND_MODE_TLB) {
memcpy(dev->dev_addr, addr, dev->addr_len);
return 0;
}
@@ -948,8 +944,8 @@ static void alb_swap_mac_addr(struct bonding *bond, struct slave *slave1, struct
u8 tmp_mac_addr[ETH_ALEN];
memcpy(tmp_mac_addr, slave1->dev->dev_addr, ETH_ALEN);
- alb_set_slave_mac_addr(slave1, slave2->dev->dev_addr, bond->alb_info.rlb_enabled);
- alb_set_slave_mac_addr(slave2, tmp_mac_addr, bond->alb_info.rlb_enabled);
+ alb_set_slave_mac_addr(slave1, slave2->dev->dev_addr);
+ alb_set_slave_mac_addr(slave2, tmp_mac_addr);
}
@@ -1096,8 +1092,7 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
/* Try setting slave mac to bond address and fall-through
to code handling that situation below... */
- alb_set_slave_mac_addr(slave, bond->dev->dev_addr,
- bond->alb_info.rlb_enabled);
+ alb_set_slave_mac_addr(slave, bond->dev->dev_addr);
}
/* The slave's address is equal to the address of the bond.
@@ -1133,8 +1128,7 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
}
if (free_mac_slave) {
- alb_set_slave_mac_addr(slave, free_mac_slave->perm_hwaddr,
- bond->alb_info.rlb_enabled);
+ alb_set_slave_mac_addr(slave, free_mac_slave->perm_hwaddr);
pr_warning("%s: Warning: the hw address of slave %s is in use by the bond; giving it the hw address of %s\n",
bond->dev->name, slave->dev->name,
@@ -1491,8 +1485,7 @@ int bond_alb_init_slave(struct bonding *bond, struct slave *slave)
{
int res;
- res = alb_set_slave_mac_addr(slave, slave->perm_hwaddr,
- bond->alb_info.rlb_enabled);
+ res = alb_set_slave_mac_addr(slave, slave->perm_hwaddr);
if (res) {
return res;
}
@@ -1643,8 +1636,7 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave
alb_swap_mac_addr(bond, swap_slave, new_slave);
} else {
/* set the new_slave to the bond mac address */
- alb_set_slave_mac_addr(new_slave, bond->dev->dev_addr,
- bond->alb_info.rlb_enabled);
+ alb_set_slave_mac_addr(new_slave, bond->dev->dev_addr);
}
if (swap_slave) {
@@ -1704,8 +1696,7 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave);
alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave);
} else {
- alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr,
- bond->alb_info.rlb_enabled);
+ alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr);
read_lock(&bond->lock);
alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr);
--
Jiri Bohac <jbohac@suse•cz>
SUSE Labs, SUSE CZ
next reply other threads:[~2012-01-18 22:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-18 22:24 Jiri Bohac [this message]
2012-01-18 22:30 ` [PATCH] bonding: fix enslaving in alb mode when link down Jiri Bohac
2012-01-19 1:45 ` Jay Vosburgh
2012-01-19 2:00 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120118222454.GA11966@midget.suse.cz \
--to=jbohac@suse$(echo .)cz \
--cc=fubar@us$(echo .)ibm.com \
--cc=netdev@vger$(echo .)kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox