From: Andy Green <andy.green@linaro•org>
To: linux-omap@vger•kernel.org
Cc: s-jan@ti•com, arnd@arndb•de, patches@linaro•org,
tony@atomide•com, netdev@vger•kernel.org,
linux-kernel@vger•kernel.org, rostedt@goodmis•org,
linux-arm-kernel@lists•infradead.org
Subject: [PATCH 4 4/4] config test config extending omap2plus with wl12xx etc
Date: Thu, 05 Jul 2012 10:45:03 +0800 [thread overview]
Message-ID: <20120705024501.26317.53085.stgit@build.warmcat.com> (raw)
In-Reply-To: <20120705024259.26317.16000.stgit@build.warmcat.com>
From: Andy Green <andy@warmcat•com>
This is just provided for testing convenience, it has enough config
options to get Ethernet and WL12xx driver on PandaBoard / ES up
You should be able to reproduce something like this, with different
MAC addresses.
# ifconfig -a
eth0 Link encap:Ethernet HWaddr 2e:20:3c:ea:46:01
inet addr:10.42.0.98 Bcast:10.42.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13 errors:0 dropped:0 overruns:0 frame:0
TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1647 (1.6 KB) TX bytes:5534 (5.5 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:100 (100.0 B) TX bytes:100 (100.0 B)
wlan0 Link encap:Ethernet HWaddr 2e:60:3c:ea:46:01
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Signed-off-by: Andy Green <andy.green@linaro•org>
---
arch/arm/configs/omap2plus_defconfig | 35 ++++++++++++++--------------------
1 file changed, 14 insertions(+), 21 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index f3087cb..7dcd384 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -2,13 +2,13 @@ CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
@@ -20,13 +20,12 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_OMAP=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_LEDS=y
@@ -60,6 +59,7 @@ CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_CFG80211=m
+CONFIG_LIB80211=m
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
@@ -87,22 +87,20 @@ CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_MD=y
CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_SMSC_PHY=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
+CONFIG_WL_TI=y
+CONFIG_WL12XX=m
+CONFIG_WLCORE_SDIO=m
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
@@ -131,14 +129,14 @@ CONFIG_POWER_SUPPLY=y
CONFIG_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
-CONFIG_REGULATOR_TWL4030=y
+CONFIG_MFD_WL1273_CORE=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TWL4030=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP_LCD_VGA=y
CONFIG_OMAP2_DSS=m
CONFIG_OMAP2_DSS_RFBI=y
CONFIG_OMAP2_DSS_SDI=y
@@ -153,7 +151,6 @@ CONFIG_PANEL_ACX565AKM=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
-CONFIG_DISPLAY_SUPPORT=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
@@ -173,7 +170,6 @@ CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
@@ -212,23 +208,20 @@ CONFIG_JFFS2_RUBIN=y
CONFIG_UBIFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
next prev parent reply other threads:[~2012-07-05 2:45 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-05 2:44 [PATCH 4 0/4] Add ability to set defaultless network device MAC addresses to deterministic computed locally administered values Andy Green
2012-07-05 2:44 ` [PATCH 4 1/4] OMAP: add cpu id register to MAC address helper Andy Green
2012-07-05 2:44 ` [PATCH 4 2/4] NET ethernet introduce mac_platform helper Andy Green
2012-07-05 3:12 ` Joe Perches
2012-07-05 3:20 ` Andy Green
2012-07-05 3:25 ` Joe Perches
2012-07-06 22:40 ` Ben Hutchings
2012-07-05 2:44 ` [PATCH 4 3/4] OMAP4 PANDA register ethernet and wlan for automatic mac allocation Andy Green
2012-07-05 2:45 ` Andy Green [this message]
2012-07-10 12:37 ` [PATCH 4 0/4] Add ability to set defaultless network device MAC addresses to deterministic computed locally administered values Florian Fainelli
2012-07-10 12:58 ` "Andy Green (林安廸)"
2012-07-10 13:08 ` Steven Rostedt
2012-07-10 15:20 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120705024501.26317.53085.stgit@build.warmcat.com \
--to=andy.green@linaro$(echo .)org \
--cc=arnd@arndb$(echo .)de \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=linux-omap@vger$(echo .)kernel.org \
--cc=netdev@vger$(echo .)kernel.org \
--cc=patches@linaro$(echo .)org \
--cc=rostedt@goodmis$(echo .)org \
--cc=s-jan@ti$(echo .)com \
--cc=tony@atomide$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox