public inbox for netdev@vger.kernel.org 
 help / color / mirror / Atom feed
From: Veaceslav Falico <vfalico@redhat•com>
To: Nikolay Aleksandrov <nikolay@redhat•com>
Cc: netdev@vger•kernel.org, fubar@us•ibm.com, andy@greyhouse•net,
	davem@davemloft•net, linux@8192•net, nicolas.2p.debian@free•fr,
	rick.jones2@hp•com
Subject: Re: [PATCH net-next 2/6] bonding: add helper function bond_get_targets_ip(targets, ip)
Date: Wed, 19 Jun 2013 23:41:51 +0200	[thread overview]
Message-ID: <20130619214151.GA10910@redhat.com> (raw)
In-Reply-To: <51C22389.7030803@redhat.com>

On Wed, Jun 19, 2013 at 11:32:57PM +0200, Nikolay Aleksandrov wrote:
>On 19/06/13 19:34, Veaceslav Falico wrote:
>> Add function bond_get_targets_ip(targets, ip) which searches through
>> targets array of ips (arp_targets) and returns the position of first
>> match. If ip == 0, returns the first free slot. On failure to find the
>> ip or free slot, return -1.
>>
>> Use it to verify if the arp we've received is valid and in sysfs.
>>
>> Signed-off-by: Veaceslav Falico <vfalico@redhat•com>
>> ---
>>  drivers/net/bonding/bond_main.c  |   17 ++++-------
>>  drivers/net/bonding/bond_sysfs.c |   56 +++++++++++++++----------------------
>>  drivers/net/bonding/bonding.h    |   16 +++++++++++
>>  3 files changed, 45 insertions(+), 44 deletions(-)
>>
>> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>> index 3d8b5ba..09a79eb 100644
>> --- a/drivers/net/bonding/bond_main.c
>> +++ b/drivers/net/bonding/bond_main.c
>> @@ -2599,22 +2599,17 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
>>
>>  static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
>>  {
>> -	int i;
>> -	__be32 *targets = bond->params.arp_targets;
>> -
>>  	if (!bond_has_this_ip(bond, tip)) {
>>  		pr_debug("bva: tip %pI4 not found\n", &tip);
>>  		return;
>>  	}
>>
>> -	for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
>> -		pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip)\n",
>> -			 &sip, &tip, i, &targets[i]);
>> -		if (sip == targets[i]) {
>> -			slave->last_arp_rx = jiffies;
>> -			return;
>> -		}
>> +	if (bond_get_targets_ip(bond->params.arp_targets, sip) == -1) {
>> +		pr_debug("bva: sip %pI4 not found in targets\n", &sip);
>> +		return;
>>  	}
>Here you should probably check if sip != 0 (0.0.0.0) because ARP probes
>with such src address are common to check if there's an address conflict
>for example.

Agree, thank you!

Will add this and remove extra lines in v2.

Thanks for the review!

>> +
>small nitpick: I don't think this newline is really necessary.
>> +	slave->last_arp_rx = jiffies;
>>  }
>>
>>  static int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
>> @@ -4831,7 +4826,7 @@ static int __net_init bond_net_init(struct net *net)
>>
>>  	bond_create_proc_dir(bn);
>>  	bond_create_sysfs(bn);
>> -	
>> +
>>  	return 0;
>>  }
>>
>> diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
>> index f8bee4c..e680151 100644
>> --- a/drivers/net/bonding/bond_sysfs.c
>> +++ b/drivers/net/bonding/bond_sysfs.c
>> @@ -591,7 +591,7 @@ static ssize_t bonding_store_arp_targets(struct device *d,
>>  					 const char *buf, size_t count)
>>  {
>>  	__be32 newtarget;
>> -	int i = 0, done = 0, ret = count;
>> +	int i = 0, ret = -EINVAL;
>>  	struct bonding *bond = to_bond(d);
>>  	__be32 *targets;
>>
>> @@ -602,57 +602,46 @@ static ssize_t bonding_store_arp_targets(struct device *d,
>>  		if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
>>  			pr_err("%s: invalid ARP target %pI4 specified for addition\n",
>>  			       bond->dev->name, &newtarget);
>> -			ret = -EINVAL;
>>  			goto out;
>>  		}
>> -		/* look for an empty slot to put the target in, and check for dupes */
>> -		for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
>> -			if (targets[i] == newtarget) { /* duplicate */
>> -				pr_err("%s: ARP target %pI4 is already present\n",
>> -				       bond->dev->name, &newtarget);
>> -				ret = -EINVAL;
>> -				goto out;
>> -			}
>> -			if (targets[i] == 0) {
>> -				pr_info("%s: adding ARP target %pI4.\n",
>> -					bond->dev->name, &newtarget);
>> -				done = 1;
>> -				targets[i] = newtarget;
>> -			}
>> +
>> +		if (bond_get_targets_ip(targets, newtarget) != -1) { /* dup */
>> +			pr_err("%s: ARP target %pI4 is already present\n",
>> +			       bond->dev->name, &newtarget);
>> +			goto out;
>>  		}
>> -		if (!done) {
>> +
>> +		i = bond_get_targets_ip(targets, 0); /* first free slot */
>> +		if (i == -1) {
>>  			pr_err("%s: ARP target table is full!\n",
>>  			       bond->dev->name);
>> -			ret = -EINVAL;
>>  			goto out;
>>  		}
>>
>> +		pr_info("%s: adding ARP target %pI4.\n", bond->dev->name,
>> +			 &newtarget);
>> +		targets[i] = newtarget;
>> +
>Extra new line here.
>>  	} else if (buf[0] == '-')	{
>>  		if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
>>  			pr_err("%s: invalid ARP target %pI4 specified for removal\n",
>>  			       bond->dev->name, &newtarget);
>> -			ret = -EINVAL;
>>  			goto out;
>>  		}
>>
>> -		for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
>> -			if (targets[i] == newtarget) {
>> -				int j;
>> -				pr_info("%s: removing ARP target %pI4.\n",
>> -					bond->dev->name, &newtarget);
>> -				for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++)
>> -					targets[j] = targets[j+1];
>> -
>> -				targets[j] = 0;
>> -				done = 1;
>> -			}
>> -		}
>> -		if (!done) {
>> +		i = bond_get_targets_ip(targets, newtarget);
>> +		if (i == -1) {
>>  			pr_info("%s: unable to remove nonexistent ARP target %pI4.\n",
>>  				bond->dev->name, &newtarget);
>> -			ret = -EINVAL;
>>  			goto out;
>>  		}
>> +
>> +		pr_info("%s: removing ARP target %pI4.\n", bond->dev->name,
>> +			&newtarget);
>> +		for (; (i < BOND_MAX_ARP_TARGETS-1) && targets[i+1]; i++)
>> +			targets[i] = targets[i+1];
>> +		targets[i] = 0;
>> +
>Another extra new line.
>>  	} else {
>>  		pr_err("no command found in arp_ip_targets file for bond %s. Use +<addr> or -<addr>.\n",
>>  		       bond->dev->name);
>> @@ -660,6 +649,7 @@ static ssize_t bonding_store_arp_targets(struct device *d,
>>  		goto out;
>>  	}
>>
>> +	ret = count;
>>  out:
>>  	return ret;
>>  }
>> diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
>> index b38609b..7feab6c 100644
>> --- a/drivers/net/bonding/bonding.h
>> +++ b/drivers/net/bonding/bonding.h
>> @@ -464,6 +464,22 @@ static inline struct slave *bond_slave_has_mac(struct bonding *bond,
>>  	return NULL;
>>  }
>>
>> +/* Check if the ip is present in arp ip list, or first free slot if ip == 0
>> + * Returns -1 if not found, index if found
>> + */
>> +static inline int bond_get_targets_ip(__be32 *targets, __be32 ip)
>> +{
>> +	int i;
>> +
>> +	for (i = 0; i < BOND_MAX_ARP_TARGETS; i++)
>> +		if (targets[i] == ip)
>> +			return i;
>> +		else if (targets[i] == 0)
>> +			break;
>> +
>> +	return -1;
>> +}
>> +
>>  /* exported from bond_main.c */
>>  extern int bond_net_id;
>>  extern const struct bond_parm_tbl bond_lacp_tbl[];
>

      reply	other threads:[~2013-06-19 21:42 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-19 17:34 [PATCH net-next 2/6] bonding: add helper function bond_get_targets_ip(targets, ip) Veaceslav Falico
2013-06-19 21:32 ` Nikolay Aleksandrov
2013-06-19 21:41   ` Veaceslav Falico [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130619214151.GA10910@redhat.com \
    --to=vfalico@redhat$(echo .)com \
    --cc=andy@greyhouse$(echo .)net \
    --cc=davem@davemloft$(echo .)net \
    --cc=fubar@us$(echo .)ibm.com \
    --cc=linux@8192$(echo .)net \
    --cc=netdev@vger$(echo .)kernel.org \
    --cc=nicolas.2p.debian@free$(echo .)fr \
    --cc=nikolay@redhat$(echo .)com \
    --cc=rick.jones2@hp$(echo .)com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox