From: Veaceslav Falico <vfalico@redhat•com>
To: Stefan Priebe - Profihost AG <s.priebe@profihost•ag>
Cc: Linux Netdev List <netdev@vger•kernel.org>
Subject: Re: how to mix bridges and bonding inc. vlans correctly on Kernel > 3.10
Date: Wed, 13 Nov 2013 15:34:10 +0100 [thread overview]
Message-ID: <20131113143410.GN19702@redhat.com> (raw)
In-Reply-To: <52838AC8.8070005@profihost.ag>
On Wed, Nov 13, 2013 at 03:20:56PM +0100, Stefan Priebe - Profihost AG wrote:
>Hi Falico,
>Am 13.11.2013 15:12, schrieb Veaceslav Falico:
>> On Wed, Nov 13, 2013 at 02:58:40PM +0100, Stefan Priebe - Profihost AG
>> wrote:
>>> Hello,
>>>
>>> while my vlans, bridging and bonding stuff was working until 3.9 i never
>>> thought about how it is right. So maybe i was always wrong.
>>>
>>> I've this:
>>>
>>> eth2
>>> \
>>> -- bond1 -- vmbr1
>>> /
>>> eth3
>>>
>>> This works fine and as expected now i want to have a vlan using the
>>> bonding and using a bridge.
>>>
>>> I the past i had this:
>>> eth2
>>> \
>>> -- bond1 -- vmbr1
>>> / \
>>> eth3 \ vmbr1.3000
>>> \ ---- tap114i1
>>>
>>> This was working fine until 3.9.X since 3.10. Right now using 3.10 i
>>> need to put eth2 and eth3 into promisc mode to get it working ;-( this
>>> is bad!
>>
>> As a guess - do you use arp monitoring for bonding? Try using miimon -
>> there were some issues with it in 3.10, which were fixed by some huge
>> patchsets that will never hit 3.10 stable.
>> Also, the bonding configuration would be welcome.
>
>Debian Bonding konfiguration looks like this:
>auto bond1
>iface bond1 inet manual
> slaves eth2 eth3
> bond-mode 802.3ad
> bond_miimon 100
> bond_updelay 200
> bond_downdelay 0
>
>This should be miimon using lacp and not arp isn't it?
>Anything more needed?
Yeah, it's miimon, so nothing here...
I'll try to set up a reproducer in the nearest future, a bit burdened now.
Are you using 3.10.X stable? Which version exactly? And at what version did
it work - 3.9.?
Thank you!
>
>One thing i forgot the one with vmbr1.3000 does not work at all eben not
>with promisc mode. The one below works fine if i set eth2 and eth3 into
>promisc mode.
>
>Stefan
>
>>> I also tried this one without success:
>>> eth2
>>> \
>>> -- bond1 -- vmbr1
>>> / \
>>> eth3 ----- bond1.3000 --- vmbr1v3000
>>> \ ---- tap114i1
>>>
>>>
>>>
>>> Greets,
>>> Stefan
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe netdev" in
>>> the body of a message to majordomo@vger•kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-11-13 14:36 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-13 13:58 how to mix bridges and bonding inc. vlans correctly on Kernel > 3.10 Stefan Priebe - Profihost AG
2013-11-13 14:12 ` Veaceslav Falico
2013-11-13 14:20 ` Stefan Priebe - Profihost AG
2013-11-13 14:34 ` Veaceslav Falico [this message]
2013-11-13 14:43 ` Stefan Priebe - Profihost AG
2013-11-13 15:05 ` Vlad Yasevich
2013-11-13 15:17 ` Stefan Priebe - Profihost AG
2013-11-13 16:21 ` Veaceslav Falico
2013-11-13 16:43 ` Stefan Priebe - Profihost AG
2013-11-13 17:21 ` Vlad Yasevich
2013-11-13 20:09 ` Stefan Priebe
2013-11-14 3:09 ` Vlad Yasevich
2013-11-14 7:47 ` Stefan Priebe - Profihost AG
2013-11-14 12:29 ` Veaceslav Falico
2013-11-14 21:13 ` Vlad Yasevich
2013-11-16 21:02 ` Stefan Priebe
2013-11-17 3:41 ` Vladislav Yasevich
2013-11-18 7:37 ` Stefan Priebe - Profihost AG
2013-11-14 11:54 ` Veaceslav Falico
2013-11-14 14:27 ` Vlad Yasevich
2013-11-14 14:29 ` Stefan Priebe - Profihost AG
2013-11-14 14:41 ` Vlad Yasevich
2013-11-16 21:00 ` Stefan Priebe
2013-11-13 16:44 ` Vlad Yasevich
2013-11-13 17:22 ` Stefan Priebe - Profihost AG
2013-11-13 17:37 ` Vlad Yasevich
2013-11-13 17:46 ` Stefan Priebe - Profihost AG
2013-11-13 17:49 ` Vlad Yasevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131113143410.GN19702@redhat.com \
--to=vfalico@redhat$(echo .)com \
--cc=netdev@vger$(echo .)kernel.org \
--cc=s.priebe@profihost$(echo .)ag \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox