Subject: Re: how to mix bridges and bonding inc. vlans correctly on Kernel > 3.10

From: Veaceslav Falico <[email-masked]>
Date: Thu, 14 Nov 2013 13:29:28 +0100

On Thu, Nov 14, 2013 at 08:47:28AM +0100, Stefan Priebe - Profihost AG wrote:
>Hi,
>
>> eth2
>>      \
>>       -- bond1 -- vmbr1
>>      /     \
>> eth3        ----- bond1.3000 --- vmbr1v3000
>>                                      \ ---- tap114i1
>
>thos one works fine now.
>
>
>> eth2
>>      \
>>       -- bond1 -- vmbr1
>>      /              \
>> eth3                 \ vmbr1.3000
>>                            \ ---- tap114i1
>
>this one does not. Another note to this one. It also never worked on
>RHEL6 - it started working with about 2.6.39 and stopped with 3.9 or
>3.10. But it was the only one where gvrp on vlans had worked.

bridge device in this config is neither master nor slave, if I read it
correctly.

You might want to try my patch to see if it works (my previous email).

>
>Greets,
>Stefan
>--
>To unsubscribe from this list: send the line "unsubscribe netdev" in
>the body of a message to [email-masked]
>More majordomo info at  http://vger.kernel.org/majordomo-info.html