Subject: Re: [PATCH 4/5] drivers: net: APM X-Gene SoC Ethernet driver error handling

From: Arnd Bergmann <[email-masked]>
Date: Sun, 22 Dec 2013 10:34:56 +0100

On Saturday 21 December 2013, Iyappan Subramanian wrote:

> +#define CFG_RSIF_FPBUFF_TIMEOUT_EN_WR(src) \
> +	(((u32)(src)<<31) & 0x80000000)
> +#define RSIF_LCL_RXBUF_FIFO_OVERFL_INTR_RXPRT10_MASK                 0x20000000
> +#define RSIF_LCL_RXBUF_FIFO_OVERFL_INTR_RXPRT10_RD(src) \
> +	(((src) & 0x20000000)>>29)
> +#define RSIF_LCL_RXBUF_FIFO_UNDERFL_INTR_RXPRT10_MASK                0x10000000
> +#define RSIF_LCL_RXBUF_FIFO_UNDERFL_INTR_RXPRT10_RD(src) \
> +	(((src) & 0x10000000)>>28)
> +#define RSIF_CHKSUM_BUFF_FIFO_OVERFL_INTR_RXPRT10_MASK               0x08000000
> +#define RSIF_CHKSUM_BUFF_FIFO_OVERFL_INTR_RXPRT10_RD(src) \
> +	(((src) & 0x08000000)>>27)
> +#define RSIF_CHKSUM_BUFF_FIFO_UNDERFL_INTR_RXPRT10_MASK              0x04000000
> +#define RSIF_CHKSUM_BUFF_FIFO_UNDERFL_INTR_RXPRT10_RD(src) \
> +	(((src) & 0x04000000)>>26)
> +#define RSIF_TIMESTAMP_BUFF_FIFO_OVERFL_INTR_RXPRT10_MASK            0x02000000
> +#define RSIF_TIMESTAMP_BUFF_FIFO_OVERFL_INTR_RXPRT10_RD(src) \
> +	(((src) & 0x02000000)>>25)
> +#define RSIF_TIMESTAMP_BUFF_FIFO_UNDERFL_INTR_RXPRT10_MASK           0x01000000
> +#define RSIF_TIMESTAMP_BUFF_FIFO_UNDERFL_INTR_RXPRT10_RD(src) \
> +	(((src) & 0x01000000)>>24)
> +#define RSIF_ERR_BUFF_FIFO_OVERFL_INTR_RXPRT10_MASK                  0x00800000
> +#define RSIF_ERR_BUFF_FIFO_OVERFL_INTR_RXPRT10_RD(src) \
> +	(((src) & 0x00800000)>>23)
> +#define RSIF_ERR_BUFF_FIFO_UNDERFL_INTR_RXPRT10_MASK                 0x00400000
> +#define RSIF_ERR_BUFF_FIFO_UNDERFL_INTR_RXPRT10_RD(src) \
> +	(((src) & 0x00400000)>>22)
> +#define RSIF_CLEBUFF_FIFO_OVERFL_INTR_RXPRT10_MASK                   0x00200000
> +#define RSIF_CLEBUFF_FIFO_OVERFL_INTR_RXPRT10_RD(src) \
> +	(((src) & 0x00200000)>>21)

I think you can just remove all the above obfuscation, since all you ever
do is this:

> +	rc = xgene_enet_rd(priv, BLOCK_MCX_MAC_CSR, MAC_INT_REG0_ADDR, &data);
> +	if (data) {
> +		pr_err("Received MAC Error Interrupt\n");
> +
> +		if (ICM_DATA_FIFO_UNDERFL_INTR_PRT10_RD(data)) {
> +			pr_err("RxPort1 ICM Data fifo underflow intr\n");
> +			int_mask |= ICM_DATA_FIFO_UNDERFL_INTR_PRT10_MASK;
> +		}
> +		if (ICM_DATA_FIFO_OVERFL_INTR_PRT10_RD(data)) {
> +			pr_err("RxPort1 ICM Data fifo overflow intr\n");
> +			int_mask |= ICM_DATA_FIFO_OVERFL_INTR_PRT10_MASK;
> +		}
> +		if (ICM_CTRL_FIFO_UNDERFL_INTR_PRT10_RD(data)) {
> +			pr_err("RxPort1 ICM Ctrl fifo underflow intr\n");
> +			int_mask |= ICM_CTRL_FIFO_UNDERFL_INTR_PRT10_MASK;
> +		}
> +		if (ICM_CTRL_FIFO_OVERFL_INTR_PRT10_RD(data)) {
> +			pr_err("RxPort1 ICM Ctrl fifo overflow intr\n");
> +			int_mask |= ICM_CTRL_FIFO_OVERFL_INTR_PRT10_MASK;
> +		}
> +		if (ECM_DATA_FIFO_UNDERN_INTR_PRT10_RD(data)) {
> +			pr_err("RxPort1 ECM Data fifo underrun intr\n");
> +			int_mask |= ECM_DATA_FIFO_UNDERN_INTR_PRT10_MASK;
> +		}

So there is one string you print per bit. Just use an array of strings
and for_each_set_bit() loop.

	Arnd