Subject: Re: [PATCH 3/3] sh_eth: Fix dma mapping issue

From: Simon Horman <[email-masked]>
Date: Mon, 17 Nov 2014 13:09:35 +0900

Hi Sergei,

On Fri, Nov 14, 2014 at 02:05:44AM +0300, Sergei Shtylyov wrote:
> On 11/13/2014 10:05 AM, Yoshihiro Kaneko wrote:
> 
> >From: Mitsuhiro Kimura <[email-masked]>
> 
> >When CONFIG_DMA_API_DEBUG=y, many DMA error messages reports.
> >In order to use DMA debug, This patch fix following issues.
> 
> >Issue 1:
> >If dma_mapping_error function is not called appropriately after
> >DMA mapping, DMA debug will report error message when DMA unmap
> >function is called.
> 
> >Issue 2:
> >If skb_reserve function is called after DMA mapping, the relationship
> >between mapping addr and mapping size will be broken.
> >In this case, DMA debug will report error messages when DMA sync
> >function and DMA unmap function are called.
> 
> >Issue 3:
> >If the size of frame data is less than ETH_ZLEN, the size is resized
> >to ETH_ZLEN after DMA map function is called.
> >In the TX skb freeing function, dma unmap function is called with that
> >resized value. So, unmap size error will reported.
> 
> >Issue 4:
> >In the rx function, DMA map function is called without DMA unmap function
> >is called for RX skb reallocating.
> >It will case the DMA debug error that number of debug entry is full and
> >DMA debug logic is stopped.
> 
>    The rule of thumb is "fix one issue per patch". Please split accordingly.
> 
> >Signed-off-by: Mitsuhiro Kimura <[email-masked]>
> >Signed-off-by: Yoshihiro Kaneko <[email-masked]>
> 
>    Thanks for beating me to it. Fixing these issues has been on my agenda
> for a long time... :-)

as this patch is somewhat involved and as you have pointed out needs a bit
of work I'm wondering if you could take it over.

> >---
> >  drivers/net/ethernet/renesas/sh_eth.c | 26 +++++++++++++++++++++++---
> >  1 file changed, 23 insertions(+), 3 deletions(-)
> 
> >diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
> >index 0e4a407..23318cf 100644
> >--- a/drivers/net/ethernet/renesas/sh_eth.c
> >+++ b/drivers/net/ethernet/renesas/sh_eth.c
> >@@ -1136,6 +1136,11 @@ static void sh_eth_ring_format(struct net_device *ndev)
> >  		dma_map_single(&ndev->dev, skb->data, rxdesc->buffer_length,
> >  			       DMA_FROM_DEVICE);
> >  		rxdesc->addr = virt_to_phys(skb->data);
> 
>    Can't we get rid of these bogus virt_to_phys() calls, while at it?
> dma_map_single() returns a DMA address, no?
> 
> >+		if (dma_mapping_error(&ndev->dev, rxdesc->addr)) {
> >+			dev_kfree_skb(mdp->rx_skbuff[i]);
> >+			mdp->rx_skbuff[i] = NULL;
> >+			break;
> >+		}
> >  		rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
> >
> >  		/* Rx descriptor address set */
> >@@ -1364,7 +1369,7 @@ static int sh_eth_txfree(struct net_device *ndev)
> >  		if (mdp->tx_skbuff[entry]) {
> >  			dma_unmap_single(&ndev->dev, txdesc->addr,
> >  					 txdesc->buffer_length, DMA_TO_DEVICE);
> >-			dev_kfree_skb_irq(mdp->tx_skbuff[entry]);
> >+			dev_kfree_skb_any(mdp->tx_skbuff[entry]);
> 
>    Hm, I'm not sure where is this described in the changelog...
> 
> >  			mdp->tx_skbuff[entry] = NULL;
> >  			free_num++;
> >  		}
> >@@ -1466,11 +1471,19 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
> >  			if (skb == NULL)
> >  				break;	/* Better luck next round. */
> >  			sh_eth_set_receive_align(skb);
> >+			dma_unmap_single(&ndev->dev, rxdesc->addr,
> >+					 rxdesc->buffer_length,
> >+					 DMA_FROM_DEVICE);
> >  			dma_map_single(&ndev->dev, skb->data,
> >  				       rxdesc->buffer_length, DMA_FROM_DEVICE);
> >
> >  			skb_checksum_none_assert(skb);
> >  			rxdesc->addr = virt_to_phys(skb->data);
> 
>    Likewise, can we get rid of this bogu?
> 
> >+			if (dma_mapping_error(&ndev->dev, rxdesc->addr)) {
> >+				dev_kfree_skb_any(mdp->rx_skbuff[entry]);
> >+				mdp->rx_skbuff[entry] = NULL;
> >+				break;
> >+			}
> >  		}
> >  		if (entry >= mdp->num_rx_ring - 1)
> >  			rxdesc->status |=
> >@@ -2104,12 +2117,18 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
> >  	if (!mdp->cd->hw_swap)
> >  		sh_eth_soft_swap(phys_to_virt(ALIGN(txdesc->addr, 4)),
> >  				 skb->len + 2);
> >-	txdesc->addr = dma_map_single(&ndev->dev, skb->data, skb->len,
> >-				      DMA_TO_DEVICE);
> >  	if (skb->len < ETH_ZLEN)
> >  		txdesc->buffer_length = ETH_ZLEN;
> >  	else
> >  		txdesc->buffer_length = skb->len;
> >+	txdesc->addr = dma_map_single(&ndev->dev, skb->data,
> >+				      txdesc->buffer_length,
> >+				      DMA_TO_DEVICE);
> >+	if (dma_mapping_error(&ndev->dev, txdesc->addr)) {
> >+		dev_kfree_skb_any(mdp->tx_skbuff[entry]);
> >+		mdp->tx_skbuff[entry] = NULL;
> >+		goto out;
> 
>    Why not just *return*?!
> 
> [...]
> 
> WBR, Sergei
>