Subject: Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1

From: Olof Johansson <[email-masked]>
Date: Fri, 3 Apr 2015 14:56:07 -0700

On Fri, Apr 03, 2015 at 01:55:07PM -0700, Olof Johansson wrote:
> On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
> > Le 31/03/2015 10:56, Nicolas Ferre a écrit :
> > > After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> > > the macb1 interface refuses to work properly because it tries
> > > to cling to address 0 which isn't able to communicate in broadcast with
> > > the mac anymore. The micrel phy on the board is actually configured
> > > to show up at address 1.
> > > Adding the phy node and its real address fixes the issue.
> > > 
> > > Signed-off-by: Nicolas Ferre <[email-masked]>
> > > Cc: Johan Hovold <[email-masked]>
> > > Cc: <[email-masked]> #3.19
> > > ---
> > 
> > Arnd, Olof, Kevin,
> > 
> > It seems late but, is it possible to queue this patch as a 4.0 fixes?
> > 
> > Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
> > by u-boot previously.
> 
> Sure, resend it to [email-masked].

Nevermind, I ended up picking it up from the list. Applied.

-Olof