Subject: Re: Microsemi VSC 8531/41 PHY Driver

From: Andrew Lunn <[email-masked]>
Date: Fri, 29 Jul 2016 10:04:02 +0200

On Thu, Jul 28, 2016 at 06:44:37AM +0000, Raju Lakkaraju wrote:
> Hello Andrew,
> 
> Thank you for given valuable comments.
> Please see the my responses inline.
> 
> Thanks,
> Raju
> 
> -----Original Message-----
> From: Andrew Lunn [mailto:[email-masked]] 
> Sent: Tuesday, July 26, 2016 6:14 PM
> To: Raju Lakkaraju
> Cc: [email-masked]; [email-masked]; Allan Nielsen
> Subject: Re: Microsemi VSC 8531/41 PHY Driver
> 
> EXTERNAL EMAIL
> 
> 
> > +/* RGMII Rx Clock delay value change with board lay-out */ static u8 
> > +rgmii_rx_clk_delay = RGMII_RX_CLK_DELAY_1_1_NS;
> 
> Doesn't this stop you from having a board with two PHYs with different layouts? You should be getting this value from the device tree.
> 
> Raju: As of now, RGMII Rx clock delay value should be 1.1 nsec as optimized/recommended value. 
> We tested on Beaglebone Black with VSC 8531 PHY.
> We would like to provide new function to configure correct/require value based on PHY layouts 
> alone with other RGMII configuration parameters as part of our next implementation.

Hi Raju

Please can you use standard email quoting, just like everybody else does.

       Andrew