Subject: Re: [PATCH 1/2] net: dsa: mv88e6xxx: add MV88E6097 switch

From: Stefan Eichenberger <[email-masked]>
Date: Wed, 23 Nov 2016 21:41:46 +0100

On Wed, Nov 23, 2016 at 07:10:16PM +0100, Andrew Lunn wrote:
> > +	[MV88E6097] = {
> > +		.prod_num = PORT_SWITCH_ID_PROD_NUM_6097,
> > +		.family = MV88E6XXX_FAMILY_6097,
> > +		.name = "Marvell 88E6097/88E6097F",
> > +		.num_databases = 4096,
> > +		.num_ports = 11,
> > +		.port_base_addr = 0x10,
> > +		.global1_addr = 0x1b,
> > +		.age_time_coeff = 15000,
> > +		.flags = MV88E6XXX_FLAGS_FAMILY_6097,
> > +		.ops = &mv88e6097_ops,
> 
> Upps. Sorry, i missed something when you rebased onto net-next. You
> are missing .g1_irqs = . It is probably 9. You can check the
> datasheet, global 1, register 0. If bit 8 is AVBInt, you need 9. If
> bit 8 is reserved, then 8.

No problem, bit 8-10 are reserved. So I put 8 in then.

Regards,
Stefan