Subject: Re: [PATCH net-next v3 02/13] phy: add the mvebu cp110 comphy driver

From: Antoine Tenart <[email-masked]>
Date: Wed, 30 Aug 2017 08:36:45 +0200

Hi Kishon,

On Wed, Aug 30, 2017 at 10:49:13AM +0530, Kishon Vijay Abraham I wrote:
> On Monday 28 August 2017 08:27 PM, Antoine Tenart wrote:
> > +
> > +static int mvebu_comphy_set_mode_sgmii(struct phy *phy, enum phy_mode mode)
> 
> the mode need not be passed as argument here since this function is only for
> sgmii mode.

Sure, I'll remove it.

> > +{
> > +	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
> > +	struct mvebu_comphy_priv *priv = lane->priv;
> > +	u32 val;
> > +
> > +	mvebu_comphy_ethernet_init_reset(lane, mode);
> > +
> > +	val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
> > +	val &= ~MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
> > +	val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL;
> > +	writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
> > +
> > +	val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
> > +	val &= ~MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN;
> > +	writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
> > +
> > +	regmap_read(priv->regmap, MVEBU_COMPHY_CONF1(lane->id), &val);
> > +	val &= ~MVEBU_COMPHY_CONF1_USB_PCIE;
> > +	val |= MVEBU_COMPHY_CONF1_PWRUP;
> > +	regmap_write(priv->regmap, MVEBU_COMPHY_CONF1(lane->id), val);
> > +
> > +	val = readl(priv->base + MVEBU_COMPHY_GEN1_S0(lane->id));
> > +	val &= ~MVEBU_COMPHY_GEN1_S0_TX_EMPH(0xf);
> > +	val |= MVEBU_COMPHY_GEN1_S0_TX_EMPH(0x1);
> > +	writel(val, priv->base + MVEBU_COMPHY_GEN1_S0(lane->id));
> > +
> > +	return mvebu_comphy_init_plls(lane, mode);
> > +}
> > +
> > +static int mvebu_comphy_set_mode_10gkr(struct phy *phy, enum phy_mode mode)
> 
> same here..

And here as well.

Thanks!
Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com