Subject: Re: [PATCH 3/3] ARM: dts: gr-peach: Add ETHER pin group

From: Andrew Lunn <[email-masked]>
Date: Thu, 5 Oct 2017 15:43:39 +0200

On Thu, Oct 05, 2017 at 11:39:15AM +0200, jacopo mondi wrote:
> Hi Geert
> 
> On Thu, Oct 05, 2017 at 11:09:40AM +0200, Geert Uytterhoeven wrote:
> > Hi Jacopo,
> >
> > On Thu, Oct 5, 2017 at 10:58 AM, Jacopo Mondi <[email-masked]> wrote:
> > > Add pin configuration subnode for ETHER pin group and enable the interface.
> > >
> > > Signed-off-by: Jacopo Mondi <[email-masked]>
> >
> > Reviewed-by: Geert Uytterhoeven <[email-masked]>
> >
> > > --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
> > > +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
> >
> > > @@ -88,3 +110,19 @@
> > >
> > >         status = "okay";
> > >  };
> > > +
> > > +&ether {
> > > +       pinctrl-names = "default";
> > > +       pinctrl-0 = <&ether_pins>;
> > > +
> > > +       status = "okay";
> > > +
> > > +       reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
> > > +       reset-delay-us = <5>;
> >
> > I'm afraid the PHY people (not CCed ;-) will want you to move these reset
> > properties to the phy subnode these days, despite
> > Documentation/devicetree/bindings/net/mdio.txt...

Hi Jocopo

So what is this reset resetting?

The MAC?
The PHY?

    Andrew