Subject: Re: [PATCH] net: phy: marvell: clear wol event before setting it

From: Jisheng Zhang <[email-masked]>
Date: Thu, 19 Apr 2018 16:53:51 +0800

Hi,

On Thu, 19 Apr 2018 08:38:45 +0000 Bhadram Varka wrote:

> Hi,
> 
> > -----Original Message-----
> > From: [email-masked] <[email-masked]> On
> > Behalf Of Jisheng Zhang
> > Sent: Thursday, April 19, 2018 1:33 PM
> > To: Andrew Lunn <[email-masked]>; Florian Fainelli <[email-masked]>;
> > David S. Miller <[email-masked]>
> > Cc: [email-masked]; [email-masked]; Jingju Hou
> > <[email-masked]>
> > Subject: [PATCH] net: phy: marvell: clear wol event before setting it
> > 
> > From: Jingju Hou <[email-masked]>
> > 
> > If WOL event happened once, the LED[2] interrupt pin will not be cleared unless
> > reading the CSISR register. So clear the WOL event before enabling it.
> > 
> > Signed-off-by: Jingju Hou <[email-masked]>
> > Signed-off-by: Jisheng Zhang <[email-masked]>
> > ---
> >  drivers/net/phy/marvell.c | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> > 
> > diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index
> > c22e8e383247..b6abe1cbc84b 100644
> > --- a/drivers/net/phy/marvell.c
> > +++ b/drivers/net/phy/marvell.c
> > @@ -115,6 +115,9 @@
> >  /* WOL Event Interrupt Enable */
> >  #define MII_88E1318S_PHY_CSIER_WOL_EIE			BIT(7)
> > 
> > +/* Copper Specific Interrupt Status Register */
> > +#define MII_88E1318S_PHY_CSISR				0x13
> > +  
> 
> There is already macro to represent this register - MII_M1011_IEVENT. Do we need this macro ?

Good point. Will use MII_M1011_IEVENT instead in v2.

> 
> >  /* LED Timer Control Register */
> >  #define MII_88E1318S_PHY_LED_TCR			0x12
> >  #define MII_88E1318S_PHY_LED_TCR_FORCE_INT		BIT(15)
> > @@ -1393,6 +1396,12 @@ static int m88e1318_set_wol(struct phy_device
> > *phydev,
> >  		if (err < 0)
> >  			goto error;
> > 
> > +		/* If WOL event happened once, the LED[2] interrupt pin
> > +		 * will not be cleared unless reading the CSISR register.
> > +		 * So clear the WOL event first before enabling it.
> > +		 */
> > +		phy_read(phydev, MII_88E1318S_PHY_CSISR);  
> 
> This part of the operation already taken care by ack_interrupt and did_interrupt
> [....]
> .ack_interrupt = &marvell_ack_interrupt,
> .did_interrupt = &m88e1121_did_interrupt,
> [...]
> 
> If at all WOL event occurred marvell_ack_interrupt will take care of clearing the interrupt status register.
> Am I missing anything here ?

If there's no valid irq for phy, the ack_interrupt/did_interrupt won't
be called.

Thanks