Subject: Re: [PATCH] net: phy: marvell: clear wol event before setting it

From: Andrew Lunn <[email-masked]>
Date: Mon, 30 Apr 2018 15:17:30 +0200

> > diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
> > index ed8a67d..5d3d138 100644
> > --- a/drivers/net/phy/marvell.c
> > +++ b/drivers/net/phy/marvell.c
> > @@ -55,6 +55,7 @@
> > 
> >   #define MII_M1011_IEVENT               0x13
> >   #define MII_M1011_IEVENT_CLEAR         0x0000
> > +#define MII_M1011_IEVENT_WOL_EVENT     BIT(7)
> > 
> >   #define MII_M1011_IMASK                        0x12
> > - #define MII_M1011_IMASK_INIT           0x6400
> > + #define MII_M1011_IMASK_INIT           0x6480
> > 
> > @@ -195,13 +196,40 @@ struct marvell_priv {
> >          bool copper;
> >   };
> > 
> > +static int marvell_clear_wol_status(struct phy_device *phydev)
> > +{
> > +       int err, temp, oldpage;
> > +
> > +       oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
> > +       if (oldpage < 0)
> > +               return oldpage;
> > +
> > +       err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
> > +                        MII_88E1318S_PHY_WOL_PAGE);
> > +       if (err < 0)
> > +               return err;
> > +
> > +       /*
> > +        * Clear WOL status so that for next WOL event
> > +        * interrupt will be generated by HW
> > +        */
> > +       temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
> > +       temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
> > +       err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
> 
> is it better to reuse __phy_write()?

phy_modify_paged() would be the best function to use.

	Andrew