Subject: [PATCH net-next v3 5/6] net: phy: mscc: shorten `x != 0` condition to `x`

From: Quentin Schulz <[email-masked]>
Date: Mon, 8 Oct 2018 12:07:27 +0200

`if (x != 0)` is basically a more verbose version of `if (x)` so let's
use the latter so it's consistent throughout the whole driver.

Reviewed-by: Florian Fainelli <[email-masked]>
Reviewed-by: Andrew Lunn <[email-masked]>
Signed-off-by: Quentin Schulz <[email-masked]>
---
 drivers/net/phy/mscc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 0ff7803ed16b..6bfdc168c62b 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -310,7 +310,7 @@ static int vsc85xx_mdix_set(struct phy_device *phydev, u8 mdix)
 			     DISABLE_HP_AUTO_MDIX_MASK);
 	}
 	rc = phy_write(phydev, MSCC_PHY_BYPASS_CONTROL, reg_val);
-	if (rc != 0)
+	if (rc)
 		return rc;
 
 	reg_val = 0;
@@ -425,14 +425,14 @@ static int vsc85xx_wol_set(struct phy_device *phydev,
 		reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK);
 		reg_val |= MII_VSC85XX_INT_MASK_WOL;
 		rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val);
-		if (rc != 0)
+		if (rc)
 			goto out_unlock;
 	} else {
 		/* Disable the WOL interrupt */
 		reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK);
 		reg_val &= (~MII_VSC85XX_INT_MASK_WOL);
 		rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val);
-		if (rc != 0)
+		if (rc)
 			goto out_unlock;
 	}
 	/* Clear WOL iterrupt status */
@@ -603,7 +603,7 @@ static int vsc85xx_mac_if_set(struct phy_device *phydev,
 		goto out_unlock;
 	}
 	rc = phy_write(phydev, MSCC_PHY_EXT_PHY_CNTL_1, reg_val);
-	if (rc != 0)
+	if (rc)
 		goto out_unlock;
 
 	rc = genphy_soft_reset(phydev);
-- 
2.17.1