Subject: Re: [PATCH 3/4] net: macb: Add pm runtime support

From: Andrew Lunn <[email-masked]>
Date: Wed, 31 Oct 2018 15:54:00 +0100

On Wed, Oct 31, 2018 at 09:10:22AM +0530, Harini Katakam wrote:
> From: Harini Katakam <[email-masked]>
> 
> Add runtime pm functions and move clock handling there.
> If device is suspended and not a wake device, then return from
> mdio read/write functions without performing any action because
> the clocks are not active.
> 
> Signed-off-by: Shubhrajyoti Datta <[email-masked]>
> Signed-off-by: Harini Katakam <[email-masked]>
> ---
> Changes from RFC:
> Updated pm get sync/put sync calls.
> Removed unecessary clk up in mdio helpers.

This last bit has me worried.

The MDIO bus is a shared bus with a life of its own.  You can have
multiple PHYs and switches on it. The PHYs can for a different
Ethernet MAC. Switch drivers will expect to be able to address the
switch when the interface is down.

The FEC driver did something similar for a while. I had to make MDIO
read/write runtime PM aware, otherwise i could not access the Ethernet
switch hanging of its MDIO bus.

	Andrew