Subject: [PATCH 6/7] net: phy: at803x: Add support to disable tx/rx delays

From: Vinod Koul <[email-masked]>
Date: Wed, 2 Jan 2019 14:47:28 +0530

Some controllers require the tx and rx delays to be disabled. So check
the property and if present do not enable the delay and disable the
delay explicitly.

Signed-off-by: Vinod Koul <[email-masked]>
---
 drivers/net/phy/at803x.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 63e3d3d774d1..9bfc0d381159 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -122,6 +122,17 @@ static inline int at803x_enable_tx_delay(struct phy_device *phydev)
 					AT803X_DEBUG_TX_CLK_DLY_EN);
 }
 
+static inline int at803x_disable_rx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
+					AT803X_DEBUG_RX_CLK_DLY_EN, 0);
+}
+
+static inline int at803x_disable_tx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
+					AT803X_DEBUG_TX_CLK_DLY_EN, 0);
+}
 /* save relevant PHY registers to private copy */
 static void at803x_context_save(struct phy_device *phydev,
 				struct at803x_context *context)
@@ -250,12 +261,18 @@ static int at803x_probe(struct phy_device *phydev)
 static int at803x_config_init(struct phy_device *phydev)
 {
 	bool rx_delay = false, tx_delay = false;
+	bool rx_disable_prop, tx_disable_prop;
 	int ret;
 
 	ret = genphy_config_init(phydev);
 	if (ret < 0)
 		return ret;
 
+	rx_disable_prop = device_property_read_bool(&phydev->mdio.dev,
+						    "rx-delay-disable");
+	tx_disable_prop = device_property_read_bool(&phydev->mdio.dev,
+						    "rx-delay-disable");
+
 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
 			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
 		rx_delay = true;
@@ -263,6 +280,12 @@ static int at803x_config_init(struct phy_device *phydev)
 			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
 		tx_delay = true;
 
+	/* if DT specified disable delay then don't enable it */
+	if (rx_disable_prop)
+		rx_delay = false;
+	if (tx_disable_prop)
+		tx_delay = false;
+
 	if (rx_delay) {
 		ret = at803x_enable_rx_delay(phydev);
 		if (ret < 0)
@@ -275,6 +298,19 @@ static int at803x_config_init(struct phy_device *phydev)
 			return ret;
 	}
 
+	/* if DT specified disable delay then disable it explicitly */
+	if (rx_disable_prop) {
+		ret = at803x_disable_rx_delay(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (tx_disable_prop) {
+		ret = at803x_disable_tx_delay(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
 	return 0;
 }
 
-- 
2.20.1