Subject: [PATCH 7/8] DO-NOT-MERGE: arm64: allwinner: a64: enable Bluetooth On Pine64

From: Vasily Khoruzhick <[email-masked]>
Date: Fri, 18 Jan 2019 09:02:31 -0800

Pine64 has optional RTL8723BS WiFi + BT module, BT is connected to UART1
and uses PL4 as BT reset, PL5 as device wake GPIO, PL6 as host wake GPIO
the I2C controlling signals are connected to R_I2C bus.

Enable it in the device tree.

Signed-off-by: Vasily Khoruzhick <[email-masked]>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 216f2f5db5ef..4d48aa31d420 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -302,7 +302,15 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
-	status = "disabled";
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		firmware-postfix = "pine64";
+	};
 };
 
 /* On Pi-2 connector */
-- 
2.20.1