Subject: Re: [RFC PATCH v3 net-next 06/11] dt-bindings: net: ti: add new cpsw switch driver bindings

From: Andrew Lunn <[email-masked]>
Date: Fri, 26 Apr 2019 00:40:21 +0200

> +Required Sub-nodes:
> +- ports	: contains CPSW external ports descriptions
> +	Required properties:
> +	- #address-cells : Must be 1
> +	- #size-cells : Must be 0
> +	- reg : CPSW port number. Should be 1 or 2
> +	- phys : phandle on phy-gmii-sel PHY (see phy/ti-phy-gmii-sel.txt)
> +	- phy-mode : operation mode of the PHY interface [1]
> +	- phy-handle : phandle to a PHY on an MDIO bus [1]

> +		cpsw_port1: port@1 {
> +			reg = <1>;
> +			ti,label = "port1";
> +			/* Filled in by U-Boot */
> +			mac-address = [ 00 00 00 00 00 00 ];
> +			phys = <&phy_gmii_sel 1>;

Hi Grygorii

phy-mode and phy-handle are required, but missing from your example.

Otherwise, this looks like a reasonable binding.

	   Andrew