Subject: [PATCH v2 net-next] net: stmmac: move reset gpio parse & request to stmmac_mdio_register

From: Jisheng Zhang <[email-masked]>
Date: Thu, 6 Jun 2019 10:31:56 +0000

Move the reset gpio dt parse and request to stmmac_mdio_register(),
thus makes the mdio code straightforward.

This patch also replace stack var mdio_bus_data with data to simplify
the code.

Signed-off-by: Jisheng Zhang <[email-masked]>
---
Since v1:
 - rebase on the latest net-next tree

 .../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 58 ++++++++-----------
 1 file changed, 25 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 093a223fe408..7d1562ec1149 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -250,28 +250,7 @@ int stmmac_mdio_reset(struct mii_bus *bus)
 	struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data;
 
 #ifdef CONFIG_OF
-	if (priv->device->of_node) {
-		if (data->reset_gpio < 0) {
-			struct device_node *np = priv->device->of_node;
-
-			if (!np)
-				return 0;
-
-			data->reset_gpio = of_get_named_gpio(np,
-						"snps,reset-gpio", 0);
-			if (data->reset_gpio < 0)
-				return 0;
-
-			data->active_low = of_property_read_bool(np,
-						"snps,reset-active-low");
-			of_property_read_u32_array(np,
-				"snps,reset-delays-us", data->delays, 3);
-
-			if (devm_gpio_request(priv->device, data->reset_gpio,
-					      "mdio-reset"))
-				return 0;
-		}
-
+	if (gpio_is_valid(data->reset_gpio)) {
 		gpio_direction_output(data->reset_gpio,
 				      data->active_low ? 1 : 0);
 		if (data->delays[0])
@@ -313,24 +292,38 @@ int stmmac_mdio_register(struct net_device *ndev)
 	int err = 0;
 	struct mii_bus *new_bus;
 	struct stmmac_priv *priv = netdev_priv(ndev);
-	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
+	struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data;
 	struct device_node *mdio_node = priv->plat->mdio_node;
 	struct device *dev = ndev->dev.parent;
 	int addr, found, max_addr;
 
-	if (!mdio_bus_data)
+	if (!data)
 		return 0;
 
 	new_bus = mdiobus_alloc();
 	if (!new_bus)
 		return -ENOMEM;
 
-	if (mdio_bus_data->irqs)
-		memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq));
+	if (data->irqs)
+		memcpy(new_bus->irq, data->irqs, sizeof(new_bus->irq));
 
 #ifdef CONFIG_OF
-	if (priv->device->of_node)
-		mdio_bus_data->reset_gpio = -1;
+	if (priv->device->of_node) {
+		struct device_node *np = priv->device->of_node;
+
+		data->reset_gpio = of_get_named_gpio(np, "snps,reset-gpio", 0);
+		if (gpio_is_valid(data->reset_gpio)) {
+			data->active_low = of_property_read_bool(np,
+						"snps,reset-active-low");
+			of_property_read_u32_array(np,
+				"snps,reset-delays-us", data->delays, 3);
+
+			devm_gpio_request(priv->device, data->reset_gpio,
+					  "mdio-reset");
+		}
+	} else {
+		data->reset_gpio = -1;
+	}
 #endif
 
 	new_bus->name = "stmmac";
@@ -356,7 +349,7 @@ int stmmac_mdio_register(struct net_device *ndev)
 	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x",
 		 new_bus->name, priv->plat->bus_id);
 	new_bus->priv = ndev;
-	new_bus->phy_mask = mdio_bus_data->phy_mask;
+	new_bus->phy_mask = data->phy_mask;
 	new_bus->parent = priv->device;
 
 	err = of_mdiobus_register(new_bus, mdio_node);
@@ -379,10 +372,9 @@ int stmmac_mdio_register(struct net_device *ndev)
 		 * If an IRQ was provided to be assigned after
 		 * the bus probe, do it here.
 		 */
-		if (!mdio_bus_data->irqs &&
-		    (mdio_bus_data->probed_phy_irq > 0)) {
-			new_bus->irq[addr] = mdio_bus_data->probed_phy_irq;
-			phydev->irq = mdio_bus_data->probed_phy_irq;
+		if (!data->irqs && (data->probed_phy_irq > 0)) {
+			new_bus->irq[addr] = data->probed_phy_irq;
+			phydev->irq = data->probed_phy_irq;
 		}
 
 		/*
-- 
2.20.1