Subject: [PATCH net-next 3/3] net: dsa: sja1105: Mark in-band AN modes not supported for PHYLINK

From: Vladimir Oltean <[email-masked]>
Date: Wed, 26 Jun 2019 14:20:14 +0300

We need a better way to signal this, perhaps in phylink_validate, but
for now just print this error message as guidance for other people
looking at this driver's code while trying to rework PHYLINK.

Cc: Russell King <[email-masked]>
Signed-off-by: Vladimir Oltean <[email-masked]>
---
 drivers/net/dsa/sja1105/sja1105_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index ad4f604590c0..d82afb835fb7 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -806,6 +806,11 @@ static void sja1105_mac_config(struct dsa_switch *ds, int port,
 	if (sja1105_phy_mode_mismatch(priv, port, state->interface))
 		return;
 
+	if (link_an_mode == MLO_AN_INBAND) {
+		dev_err(ds->dev, "In-band AN not supported!\n");
+		return;
+	}
+
 	sja1105_adjust_port_config(priv, port, state->speed);
 }
 
-- 
2.17.1