Subject: Re: [PATCH v4 2/4] net: phy: Add function to retrieve LED configuration from the DT

From: Matthias Kaehlcke <[email-masked]>
Date: Fri, 2 Aug 2019 10:59:18 -0700

On Fri, Aug 02, 2019 at 06:38:10PM +0200, Andrew Lunn wrote:
> On Thu, Aug 01, 2019 at 12:07:57PM -0700, Matthias Kaehlcke wrote:
> > Add a phylib function for retrieving PHY LED configuration that
> > is specified in the device tree using the generic binding. LEDs
> > can be configured to be 'on' for a certain link speed or to blink
> > when there is TX/RX activity.
> > 
> > Signed-off-by: Matthias Kaehlcke <[email-masked]>
> > ---
> > Changes in v4:
> > - patch added to the series
> > ---
> >  drivers/net/phy/phy_device.c | 50 ++++++++++++++++++++++++++++++++++++
> >  include/linux/phy.h          | 15 +++++++++++
> >  2 files changed, 65 insertions(+)
> > 
> > diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> > index 6b5cb87f3866..b4b48de45712 100644
> > --- a/drivers/net/phy/phy_device.c
> > +++ b/drivers/net/phy/phy_device.c
> > @@ -2188,6 +2188,56 @@ static bool phy_drv_supports_irq(struct phy_driver *phydrv)
> >  	return phydrv->config_intr && phydrv->ack_interrupt;
> >  }
> >  
> > +int of_get_phy_led_cfg(struct phy_device *phydev, int led,
> > +		       struct phy_led_config *cfg)
> > +{
> > +	struct device_node *np, *child;
> > +	const char *trigger;
> > +	int ret;
> > +
> > +	if (!IS_ENABLED(CONFIG_OF_MDIO))
> > +		return -ENOENT;
> > +
> > +	np = of_find_node_by_name(phydev->mdio.dev.of_node, "leds");
> > +	if (!np)
> > +		return -ENOENT;
> > +
> > +	for_each_child_of_node(np, child) {
> > +		u32 val;
> > +
> > +		if (!of_property_read_u32(child, "reg", &val)) {
> > +			if (val == (u32)led)
> > +				break;
> > +		}
> > +	}
> 
> Hi Matthias
> 
> This is leaking references to np and child. In the past we have not
> cared about this too much, but we are now getting patches adding the
> missing releases. So it would be good to fix this.

Good point, I'll fix it in the next revision.

Thanks

Matthias