Subject: Re: [PATCH] net: phylink: Fix flow control resolution

From: Russell King - ARM Linux admin <[email-masked]>
Date: Thu, 5 Sep 2019 17:59:44 +0100

On Thu, Sep 05, 2019 at 07:46:18PM +0300, [email-masked] wrote:
> From: Stefan Chulski <[email-masked]>
> 
> Regarding to IEEE 802.3-2015 standard section 2
> 28B.3 Priority resolution - Table 28-3 - Pause resolution
> 
> In case of Local device Pause=1 AsymDir=0, Link partner
> Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
> transmit, disable PAUSE receive.
> And in case of Local device Pause=1 AsymDir=1, Link partner
> Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
> receive, disable PAUSE transmit.
> 
> Signed-off-by: Stefan Chulski <[email-masked]>
> Reported-by: Shaul Ben-Mayor <[email-masked]>

Good catch, thanks for the patch.

Acked-by: Russell King <[email-masked]>
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")

> ---
>  drivers/net/phy/phylink.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index a45c5de..a5a57ca 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -376,8 +376,8 @@ static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_stat
>   *  Local device  Link partner
>   *  Pause AsymDir Pause AsymDir Result
>   *    1     X       1     X     TX+RX
> - *    0     1       1     1     RX
> - *    1     1       0     1     TX
> + *    0     1       1     1     TX
> + *    1     1       0     1     RX
>   */
>  static void phylink_resolve_flow(struct phylink *pl,
>  				 struct phylink_link_state *state)
> @@ -398,7 +398,7 @@ static void phylink_resolve_flow(struct phylink *pl,
>  			new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
>  		else if (pause & MLO_PAUSE_ASYM)
>  			new_pause = state->pause & MLO_PAUSE_SYM ?
> -				 MLO_PAUSE_RX : MLO_PAUSE_TX;
> +				 MLO_PAUSE_TX : MLO_PAUSE_RX;
>  	} else {
>  		new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK;
>  	}
> -- 
> 1.9.1
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up