Subject: [PATCH AUTOSEL 5.3 62/71] net: phy: micrel: add Asym Pause workaround for KSZ9021

From: Sasha Levin <[email-masked]>
Date: Tue, 1 Oct 2019 12:39:12 -0400

From: Hans Andersson <[email-masked]>

[ Upstream commit 407d8098cb1ab338199f4753162799a488d87d23 ]

The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric
Pause capability is set. This issue is described in a Silicon Errata
(DS80000691D or DS80000692D), which advises to always disable the
capability.

Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause.
This patch apply the same workaround as the one for KSZ9031.

Fixes: 3aed3e2a143c ("net: phy: micrel: add Asym Pause workaround")
Signed-off-by: Hans Andersson <[email-masked]>
Reviewed-by: Andrew Lunn <[email-masked]>
Signed-off-by: David S. Miller <[email-masked]>
Signed-off-by: Sasha Levin <[email-masked]>
---
 drivers/net/phy/micrel.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 3c8186f269f9e..2fea5541c35a8 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -763,6 +763,8 @@ static int ksz9031_get_features(struct phy_device *phydev)
 	 * Whenever the device's Asymmetric Pause capability is set to 1,
 	 * link-up may fail after a link-up to link-down transition.
 	 *
+	 * The Errata Sheet is for ksz9031, but ksz9021 has the same issue
+	 *
 	 * Workaround:
 	 * Do not enable the Asymmetric Pause capability bit.
 	 */
@@ -1076,6 +1078,7 @@ static struct phy_driver ksphy_driver[] = {
 	/* PHY_GBIT_FEATURES */
 	.driver_data	= &ksz9021_type,
 	.probe		= kszphy_probe,
+	.get_features	= ksz9031_get_features,
 	.config_init	= ksz9021_config_init,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
-- 
2.20.1