Subject: [PATCH 3/7] brcmfmac: fix interface sanity check

From: Johan Hovold <[email-masked]>
Date: Tue, 10 Dec 2019 12:44:22 +0100

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable <[email-masked]>     # 3.4
Cc: Arend van Spriel <[email-masked]>
Signed-off-by: Johan Hovold <[email-masked]>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index 06f3c01f10b3..7cdfde9b3dea 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1348,7 +1348,7 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		goto fail;
 	}
 
-	desc = &intf->altsetting[0].desc;
+	desc = &intf->cur_altsetting->desc;
 	if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
 	    (desc->bInterfaceSubClass != 2) ||
 	    (desc->bInterfaceProtocol != 0xff)) {
@@ -1361,7 +1361,7 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	num_of_eps = desc->bNumEndpoints;
 	for (ep = 0; ep < num_of_eps; ep++) {
-		endpoint = &intf->altsetting[0].endpoint[ep].desc;
+		endpoint = &intf->cur_altsetting->endpoint[ep].desc;
 		endpoint_num = usb_endpoint_num(endpoint);
 		if (!usb_endpoint_xfer_bulk(endpoint))
 			continue;
-- 
2.24.0