Subject: Re: [PATCH v7 1/2] net: mdio: add ipq8064 mdio driver

From: Andrew Lunn <[email-masked]>
Date: Tue, 25 Feb 2020 02:45:00 +0100

> +static int
> +ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset)
> +{
> +	struct ipq8064_mdio *priv = bus->priv;
> +	u32 miiaddr = MII_BUSY | MII_CLKRANGE_250_300M;
> +	u32 ret_val;
> +	int err;

Hi Ansuel

Reverse Christmas tree. priv needs to move down a line.

> +
> +	/* Reject clause 45 */
> +	if (reg_offset & MII_ADDR_C45)
> +		return -EOPNOTSUPP;
> +
> +	miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
> +		   ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
> +
> +	regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
> +	usleep_range(8, 10);
> +
> +	err = ipq8064_mdio_wait_busy(priv);
> +	if (err)
> +		return err;
> +
> +	regmap_read(priv->base, MII_DATA_REG_ADDR, &ret_val);
> +	return (int)ret_val;
> +}
> +
> +static int
> +ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset, u16 data)
> +{
> +	struct ipq8064_mdio *priv = bus->priv;
> +	u32 miiaddr = MII_WRITE | MII_BUSY | MII_CLKRANGE_250_300M;

Same here.

> +static int
> +ipq8064_mdio_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct ipq8064_mdio *priv;
> +	struct mii_bus *bus;
> +	int ret;
> +
> +	bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv));
> +	if (!bus)
> +		return -ENOMEM;
> +
> +	bus->name = "ipq8064_mdio_bus";
> +	bus->read = ipq8064_mdio_read;
> +	bus->write = ipq8064_mdio_write;
> +	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
> +	bus->parent = &pdev->dev;
> +
> +	priv = bus->priv;
> +	priv->base = syscon_node_to_regmap(np);
> +	if (IS_ERR(priv->base) && priv->base != ERR_PTR(-EPROBE_DEFER))
> +		priv->base = syscon_regmap_lookup_by_phandle(np, "master");

"master" is not documented in the binding. Do we really need two
different ways to get the base address?

	  Andrew