Subject: Re: [PATCH net-next 1/3] dt-bindings: net: add dt bindings for marvell10g driver

From: Rob Herring <[email-masked]>
Date: Thu, 27 Feb 2020 11:08:58 -0600

On Thu, 27 Feb 2020 09:52:36 +0000, Russell King wrote:
> Add a DT bindings document for the Marvell 10G driver, which will
> augment the generic ethernet PHY binding by having LED mode
> configuration.
> 
> Signed-off-by: Russell King <[email-masked]>
> ---
>  .../devicetree/bindings/net/marvell,10g.yaml  | 31 +++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/marvell,10g.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
Documentation/devicetree/bindings/net/marvell,10g.example.dts:18.13-23: Warning (reg_format): /example-0/ethernet-phy@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'

See https://patchwork.ozlabs.org/patch/1245687
Please check and re-submit.