Subject: Re: [PATCH net-next v4 6/9] net: phy: marvell10g: use phy_read_mmd_poll_timeout() to simplify the code

From: Dejin Zheng <[email-masked]>
Date: Mon, 23 Mar 2020 00:18:14 +0800

On Sun, Mar 22, 2020 at 04:36:59PM +0100, Andrew Lunn wrote:
> > --- a/drivers/net/phy/marvell10g.c
> > +++ b/drivers/net/phy/marvell10g.c
> > @@ -241,22 +241,17 @@ static int mv3310_power_up(struct phy_device *phydev)
> >  
> >  static int mv3310_reset(struct phy_device *phydev, u32 unit)
> >  {
> > -	int retries, val, err;
> > +	int val, err;
> >  
> >  	err = phy_modify_mmd(phydev, MDIO_MMD_PCS, unit + MDIO_CTRL1,
> >  			     MDIO_CTRL1_RESET, MDIO_CTRL1_RESET);
> >  	if (err < 0)
> >  		return err;
> >  
> > -	retries = 20;
> > -	do {
> > -		msleep(5);
> > -		val = phy_read_mmd(phydev, MDIO_MMD_PCS, unit + MDIO_CTRL1);
> > -		if (val < 0)
> > -			return val;
> > -	} while (val & MDIO_CTRL1_RESET && --retries);
> 
> This is another example of the sleep happening first. To keep the code
> more similar, you probably should add an msleep(5) before calling
> phy_read_mmd_poll_timeout().
> 
> 	Andrew
Andrew, you're right, do it right away. Thank you for helping me so
patiently!