Subject: Re: [PATCH net v3 1/2] net: phy: marvell10g: disable temperature sensor on 2110

From: Russell King - ARM Linux admin <[email-masked]>
Date: Thu, 23 Apr 2020 14:37:44 +0100

On Thu, Apr 23, 2020 at 08:08:01AM +0300, Baruch Siach wrote:
> The 88E2110 temperature sensor is in a different location than 88X3310,
> and it has no enable/disable option.
> 
> Fixes: 62d01535474b61 ("net: phy: marvell10g: add support for the 88x2110 PHY")
> Cc: Maxime Chevallier <[email-masked]>
> Signed-off-by: Baruch Siach <[email-masked]>
> ---

Shouldn't this series have a covering message?

In any case:

Reviewed-by: Russell King <[email-masked]>

> v3: No change
> 
> v2: No change
> ---
>  drivers/net/phy/marvell10g.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
> index 95e3f4644aeb..69530a84450f 100644
> --- a/drivers/net/phy/marvell10g.c
> +++ b/drivers/net/phy/marvell10g.c
> @@ -169,6 +169,9 @@ static int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
>  	u16 val;
>  	int ret;
>  
> +	if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310)
> +		return 0;
> +
>  	ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP,
>  			    MV_V2_TEMP_UNKNOWN);
>  	if (ret < 0)
> @@ -193,6 +196,9 @@ static int mv3310_hwmon_probe(struct phy_device *phydev)
>  	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
>  	int i, j, ret;
>  
> +	if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310)
> +		return 0;
> +
>  	priv->hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
>  	if (!priv->hwmon_name)
>  		return -ENODEV;
> -- 
> 2.26.1
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up