Subject: [PATCH AUTOSEL 5.6 30/62] net: Make PTP-specific drivers depend on PTP_1588_CLOCK

From: Sasha Levin <[email-masked]>
Date: Thu, 14 May 2020 14:51:15 -0400

From: Clay McClure <[email-masked]>

[ Upstream commit b6d49cab44b567b3e0a5544b3d61e516a7355fad ]

Commit d1cbfd771ce8 ("ptp_clock: Allow for it to be optional") changed
all PTP-capable Ethernet drivers from `select PTP_1588_CLOCK` to `imply
PTP_1588_CLOCK`, "in order to break the hard dependency between the PTP
clock subsystem and ethernet drivers capable of being clock providers."
As a result it is possible to build PTP-capable Ethernet drivers without
the PTP subsystem by deselecting PTP_1588_CLOCK. Drivers are required to
handle the missing dependency gracefully.

Some PTP-capable Ethernet drivers (e.g., TI_CPSW) factor their PTP code
out into separate drivers (e.g., TI_CPTS_MOD). The above commit also
changed these PTP-specific drivers to `imply PTP_1588_CLOCK`, making it
possible to build them without the PTP subsystem. But as Grygorii
Strashko noted in [1]:

On Wed, Apr 22, 2020 at 02:16:11PM +0300, Grygorii Strashko wrote:

> Another question is that CPTS completely nonfunctional in this case and
> it was never expected that somebody will even try to use/run such
> configuration (except for random build purposes).

In my view, enabling a PTP-specific driver without the PTP subsystem is
a configuration error made possible by the above commit. Kconfig should
not allow users to create a configuration with missing dependencies that
results in "completely nonfunctional" drivers.

I audited all network drivers that call ptp_clock_register() but merely
`imply PTP_1588_CLOCK` and found five PTP-specific drivers that are
likely nonfunctional without PTP_1588_CLOCK:

    NET_DSA_MV88E6XXX_PTP
    NET_DSA_SJA1105_PTP
    MACB_USE_HWSTAMP
    CAVIUM_PTP
    TI_CPTS_MOD

Note how these symbols all reference PTP or timestamping in their name;
this is a clue that they depend on PTP_1588_CLOCK.

Change them from `imply PTP_1588_CLOCK` [2] to `depends on PTP_1588_CLOCK`.
I'm not using `select PTP_1588_CLOCK` here because PTP_1588_CLOCK has
its own dependencies, which `select` would not transitively apply.

Additionally, remove the `select NET_PTP_CLASSIFY` from CPTS_TI_MOD;
PTP_1588_CLOCK already selects that.

[1]: https://lore.kernel.org/lkml/[email-masked]/

[2]: NET_DSA_SJA1105_PTP had never declared any type of dependency on
PTP_1588_CLOCK (`imply` or otherwise); adding a `depends on PTP_1588_CLOCK`
here seems appropriate.

Cc: Arnd Bergmann <[email-masked]>
Cc: Richard Cochran <[email-masked]>
Cc: Nicolas Pitre <[email-masked]>
Cc: Grygorii Strashko <[email-masked]>
Cc: Geert Uytterhoeven <[email-masked]>
Fixes: d1cbfd771ce8 ("ptp_clock: Allow for it to be optional")
Signed-off-by: Clay McClure <[email-masked]>
Signed-off-by: David S. Miller <[email-masked]>
Signed-off-by: Sasha Levin <[email-masked]>
---
 drivers/net/dsa/mv88e6xxx/Kconfig    | 2 +-
 drivers/net/dsa/sja1105/Kconfig      | 1 +
 drivers/net/ethernet/cadence/Kconfig | 2 +-
 drivers/net/ethernet/cavium/Kconfig  | 2 +-
 drivers/net/ethernet/ti/Kconfig      | 3 +--
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/Kconfig b/drivers/net/dsa/mv88e6xxx/Kconfig
index 6435020d690dd..51185e4d7d15e 100644
--- a/drivers/net/dsa/mv88e6xxx/Kconfig
+++ b/drivers/net/dsa/mv88e6xxx/Kconfig
@@ -24,8 +24,8 @@ config NET_DSA_MV88E6XXX_PTP
 	bool "PTP support for Marvell 88E6xxx"
 	default n
 	depends on NET_DSA_MV88E6XXX_GLOBAL2
+	depends on PTP_1588_CLOCK
 	imply NETWORK_PHY_TIMESTAMPING
-	imply PTP_1588_CLOCK
 	help
 	  Say Y to enable PTP hardware timestamping on Marvell 88E6xxx switch
 	  chips that support it.
diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig
index 0fe1ae173aa1a..68c3086af9af8 100644
--- a/drivers/net/dsa/sja1105/Kconfig
+++ b/drivers/net/dsa/sja1105/Kconfig
@@ -20,6 +20,7 @@ tristate "NXP SJA1105 Ethernet switch family support"
 config NET_DSA_SJA1105_PTP
 	bool "Support for the PTP clock on the NXP SJA1105 Ethernet switch"
 	depends on NET_DSA_SJA1105
+	depends on PTP_1588_CLOCK
 	help
 	  This enables support for timestamping and PTP clock manipulations in
 	  the SJA1105 DSA driver.
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 53b50c24d9c95..2c4c12b03502d 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -35,8 +35,8 @@ config MACB
 config MACB_USE_HWSTAMP
 	bool "Use IEEE 1588 hwstamp"
 	depends on MACB
+	depends on PTP_1588_CLOCK
 	default y
-	imply PTP_1588_CLOCK
 	---help---
 	  Enable IEEE 1588 Precision Time Protocol (PTP) support for MACB.
 
diff --git a/drivers/net/ethernet/cavium/Kconfig b/drivers/net/ethernet/cavium/Kconfig
index 6a700d34019e3..4520e7ee00fe1 100644
--- a/drivers/net/ethernet/cavium/Kconfig
+++ b/drivers/net/ethernet/cavium/Kconfig
@@ -54,7 +54,7 @@ config	THUNDER_NIC_RGX
 config CAVIUM_PTP
 	tristate "Cavium PTP coprocessor as PTP clock"
 	depends on 64BIT && PCI
-	imply PTP_1588_CLOCK
+	depends on PTP_1588_CLOCK
 	---help---
 	  This driver adds support for the Precision Time Protocol Clocks and
 	  Timestamping coprocessor (PTP) found on Cavium processors.
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index bf98e0fa7d8be..cd6eda83e1f8c 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -89,9 +89,8 @@ config TI_CPTS
 config TI_CPTS_MOD
 	tristate
 	depends on TI_CPTS
+	depends on PTP_1588_CLOCK
 	default y if TI_CPSW=y || TI_KEYSTONE_NETCP=y || TI_CPSW_SWITCHDEV=y
-	select NET_PTP_CLASSIFY
-	imply PTP_1588_CLOCK
 	default m
 
 config TI_KEYSTONE_NETCP
-- 
2.20.1