Subject: [PATCH] net: dsa: microchip: enable ksz9893 via i2c in the ksz9477 driver

From: Helmut Grohne <[email-masked]>
Date: Wed, 1 Jul 2020 13:22:20 +0200

The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI,
I²C or MDIO (very limited and not supported by this driver). While there
is already a compatible entry for the SPI bus, it was missing for I²C.

Signed-off-by: Helmut Grohne <[email-masked]>
---
 drivers/net/dsa/microchip/ksz9477_i2c.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c
index fdffd9e0c518..2805839e5c55 100644
--- a/drivers/net/dsa/microchip/ksz9477_i2c.c
+++ b/drivers/net/dsa/microchip/ksz9477_i2c.c
@@ -79,6 +79,7 @@ MODULE_DEVICE_TABLE(i2c, ksz9477_i2c_id);
 static const struct of_device_id ksz9477_dt_ids[] = {
 	{ .compatible = "microchip,ksz9477" },
 	{ .compatible = "microchip,ksz9897" },
+	{ .compatible = "microchip,ksz9893" },
 	{ .compatible = "microchip,ksz9567" },
 	{},
 };
-- 
2.20.1