Subject: [PATCH net-next v2 0/6] Marvell PP2.2 PTP support

From: Russell King - ARM Linux admin <[email-masked]>
Date: Fri, 4 Sep 2020 08:28:28 +0100

Hi,

This series adds PTP support for PP2.2 hardware to the mvpp2 driver.
Tested on the Macchiatobin eth1 port.

Note that on the Macchiatobin, eth0 uses a separate TAI block from
eth1, and there is no hardware synchronisation between the two.

 drivers/net/ethernet/marvell/Kconfig            |   6 +
 drivers/net/ethernet/marvell/mvpp2/Makefile     |   3 +-
 drivers/net/ethernet/marvell/mvpp2/mvpp2.h      | 202 +++++++++-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 410 ++++++++++++++++++---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_tai.c  | 467 ++++++++++++++++++++++++
 5 files changed, 1038 insertions(+), 50 deletions(-)
 create mode 100644 drivers/net/ethernet/marvell/mvpp2/mvpp2_tai.c

v2: add Andrew's r-bs, squash patch 6 and patch 7.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!