Subject: [PATCH 09/11] selftests: Consistently specify address for MD5 protection

From: David Ahern <[email-masked]>
Date: Sat, 9 Jan 2021 11:53:56 -0700

From: David Ahern <[email-masked]>

nettest started with -r as the remote address for MD5 passwords.
The -m argument was added to use prefixes with a length when that
feature was added to the kernel. Since -r is used to specify
remote address for client mode, change nettest to only use -m
for MD5 passwords and update fcnal-test script.

Signed-off-by: David Ahern <[email-masked]>
---
 tools/testing/selftests/net/fcnal-test.sh | 60 +++++++++++------------
 tools/testing/selftests/net/nettest.c     |  6 +--
 2 files changed, 33 insertions(+), 33 deletions(-)

diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 02b0b9ead40b..edd33f83f80e 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -801,7 +801,7 @@ ipv4_tcp_md5_novrf()
 
 	# basic use case
 	log_start
-	run_cmd nettest -s -M ${MD5_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
 	sleep 1
 	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
 	log_test $? 0 "MD5: Single address config"
@@ -817,7 +817,7 @@ ipv4_tcp_md5_novrf()
 	# wrong password
 	log_start
 	show_hint "Should timeout since client uses wrong password"
-	run_cmd nettest -s -M ${MD5_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
 	sleep 1
 	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
 	log_test $? 2 "MD5: Client uses wrong password"
@@ -825,7 +825,7 @@ ipv4_tcp_md5_novrf()
 	# client from different address
 	log_start
 	show_hint "Should timeout due to MD5 mismatch"
-	run_cmd nettest -s -M ${MD5_PW} -r ${NSB_LO_IP} &
+	run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} &
 	sleep 1
 	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
 	log_test $? 2 "MD5: Client address does not match address configured with password"
@@ -869,7 +869,7 @@ ipv4_tcp_md5()
 
 	# basic use case
 	log_start
-	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
 	sleep 1
 	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
 	log_test $? 0 "MD5: VRF: Single address config"
@@ -885,7 +885,7 @@ ipv4_tcp_md5()
 	# wrong password
 	log_start
 	show_hint "Should timeout since client uses wrong password"
-	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
 	sleep 1
 	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
 	log_test $? 2 "MD5: VRF: Client uses wrong password"
@@ -893,7 +893,7 @@ ipv4_tcp_md5()
 	# client from different address
 	log_start
 	show_hint "Should timeout since server config differs from client"
-	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_LO_IP} &
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} &
 	sleep 1
 	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
 	log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
@@ -930,31 +930,31 @@ ipv4_tcp_md5()
 	#
 
 	log_start
-	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
-	run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
 	sleep 1
 	run_cmd_nsb nettest  -r ${NSA_IP} -M ${MD5_PW}
 	log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
 
 	log_start
-	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
-	run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
 	sleep 1
 	run_cmd_nsc nettest  -r ${NSA_IP} -M ${MD5_WRONG_PW}
 	log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
 
 	log_start
 	show_hint "Should timeout since client in default VRF uses VRF password"
-	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
-	run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
 	sleep 1
 	run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW}
 	log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
 
 	log_start
 	show_hint "Should timeout since client in VRF uses default VRF password"
-	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
-	run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
 	sleep 1
 	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
 	log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
@@ -993,7 +993,7 @@ ipv4_tcp_md5()
 	# negative tests
 	#
 	log_start
-	run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -r ${NSB_IP}
+	run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP}
 	log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
 
 	log_start
@@ -2265,7 +2265,7 @@ ipv6_tcp_md5_novrf()
 
 	# basic use case
 	log_start
-	run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
 	sleep 1
 	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
 	log_test $? 0 "MD5: Single address config"
@@ -2281,7 +2281,7 @@ ipv6_tcp_md5_novrf()
 	# wrong password
 	log_start
 	show_hint "Should timeout since client uses wrong password"
-	run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
 	sleep 1
 	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
 	log_test $? 2 "MD5: Client uses wrong password"
@@ -2289,7 +2289,7 @@ ipv6_tcp_md5_novrf()
 	# client from different address
 	log_start
 	show_hint "Should timeout due to MD5 mismatch"
-	run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_LO_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} &
 	sleep 1
 	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
 	log_test $? 2 "MD5: Client address does not match address configured with password"
@@ -2333,7 +2333,7 @@ ipv6_tcp_md5()
 
 	# basic use case
 	log_start
-	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
 	sleep 1
 	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
 	log_test $? 0 "MD5: VRF: Single address config"
@@ -2349,7 +2349,7 @@ ipv6_tcp_md5()
 	# wrong password
 	log_start
 	show_hint "Should timeout since client uses wrong password"
-	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
 	sleep 1
 	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
 	log_test $? 2 "MD5: VRF: Client uses wrong password"
@@ -2357,7 +2357,7 @@ ipv6_tcp_md5()
 	# client from different address
 	log_start
 	show_hint "Should timeout since server config differs from client"
-	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_LO_IP6} &
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} &
 	sleep 1
 	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
 	log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
@@ -2394,31 +2394,31 @@ ipv6_tcp_md5()
 	#
 
 	log_start
-	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
-	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
 	sleep 1
 	run_cmd_nsb nettest -6  -r ${NSA_IP6} -M ${MD5_PW}
 	log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
 
 	log_start
-	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
-	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
 	sleep 1
 	run_cmd_nsc nettest -6  -r ${NSA_IP6} -M ${MD5_WRONG_PW}
 	log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
 
 	log_start
 	show_hint "Should timeout since client in default VRF uses VRF password"
-	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
-	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
 	sleep 1
 	run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
 	log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
 
 	log_start
 	show_hint "Should timeout since client in VRF uses default VRF password"
-	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
-	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
 	sleep 1
 	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
 	log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
@@ -2457,7 +2457,7 @@ ipv6_tcp_md5()
 	# negative tests
 	#
 	log_start
-	run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -r ${NSB_IP6}
+	run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP6}
 	log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
 
 	log_start
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index ff64012ac586..ef82766dac98 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -291,13 +291,13 @@ static int tcp_md5_remote(int sd, struct sock_args *args)
 	switch (args->version) {
 	case AF_INET:
 		sin.sin_port = htons(args->port);
-		sin.sin_addr = args->remote_addr.in;
+		sin.sin_addr = args->md5_prefix.v4.sin_addr;
 		addr = &sin;
 		alen = sizeof(sin);
 		break;
 	case AF_INET6:
 		sin6.sin6_port = htons(args->port);
-		sin6.sin6_addr = args->remote_addr.in6;
+		sin6.sin6_addr = args->md5_prefix.v6.sin6_addr;
 		addr = &sin6;
 		alen = sizeof(sin6);
 		break;
@@ -725,7 +725,7 @@ static int convert_addr(struct sock_args *args, const char *_str,
 				return 1;
 			}
 		} else {
-			args->prefix_len = pfx_len_max;
+			args->prefix_len = 0;
 		}
 		break;
 	default:
-- 
2.24.3 (Apple Git-128)