Subject: Re: [PATCH v13 net-next 07/15] net: mvpp2: add FCA periodic timer configurations

From: Russell King - ARM Linux admin <[email-masked]>
Date: Thu, 11 Feb 2021 12:47:19 +0000

On Thu, Feb 11, 2021 at 12:48:54PM +0200, [email-masked] wrote:
> @@ -751,6 +760,10 @@
>  #define MVPP2_TX_FIFO_THRESHOLD(kb)	\
>  		((kb) * 1024 - MVPP2_TX_FIFO_THRESHOLD_MIN)
>  
> +/* MSS Flow control */
> +#define FC_QUANTA		0xFFFF
> +#define FC_CLK_DIVIDER		100

You later change the number of tabs for these definitions in a later
patch. Would it be better to start having the correct number of tabs?

> +
>  /* RX buffer constants */
>  #define MVPP2_SKB_SHINFO_SIZE \
>  	SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> index 5730900..761f745 100644
> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> @@ -1280,6 +1280,49 @@ static void mvpp22_gop_init_10gkr(struct mvpp2_port *port)
>  	writel(val, mpcs + MVPP22_MPCS_CLK_RESET);
>  }
>  
> +static void mvpp22_gop_fca_enable_periodic(struct mvpp2_port *port, bool en)
> +{
> +	struct mvpp2 *priv = port->priv;
> +	void __iomem *fca = priv->iface_base + MVPP22_FCA_BASE(port->gop_id);
> +	u32 val;

net likes to have reverse christmas tree variables. I think you should
clean this up. However...

> +
> +	val = readl(fca + MVPP22_FCA_CONTROL_REG);
> +	val &= ~MVPP22_FCA_ENABLE_PERIODIC;
> +	if (en)
> +		val |= MVPP22_FCA_ENABLE_PERIODIC;
> +	writel(val, fca + MVPP22_FCA_CONTROL_REG);

	if (en)
		val = MVPP22_FCA_ENABLE_PERIODIC;
	else
		val = 0;

	mvpp2_modify(priv->iface_base + MVPP22_FCA_BASE(port->gop_id) +
		     MVPP22_FCA_CONTROL_REG, MVPP22_FCA_ENABLE_PERIODIC, val);

avoids the need for "fca".

> +}
> +
> +static void mvpp22_gop_fca_set_timer(struct mvpp2_port *port, u32 timer)
> +{
> +	struct mvpp2 *priv = port->priv;
> +	void __iomem *fca = priv->iface_base + MVPP22_FCA_BASE(port->gop_id);
> +	u32 lsb, msb;

Same reverse christmas tree issue here.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!