Subject: [net-next V2 15/15] net/mlx5: Fix lag port remapping logic

From: Saeed Mahameed <[email-masked]>
Date: Thu, 27 May 2021 11:56:24 -0700

From: Eli Cohen <[email-masked]>

Fix the logic so that if both ports netdevices are enabled or disabled,
use the trivial mapping without swapping.

If only one of the netdevice's tx is enabled, use it to remap traffic to
that port.

Signed-off-by: Eli Cohen <[email-masked]>
Signed-off-by: Saeed Mahameed <[email-masked]>
---
 drivers/net/ethernet/mellanox/mlx5/core/lag.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
index e52e2144ab12..1fb70524d067 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
@@ -118,17 +118,24 @@ static bool __mlx5_lag_is_sriov(struct mlx5_lag *ldev)
 static void mlx5_infer_tx_affinity_mapping(struct lag_tracker *tracker,
 					   u8 *port1, u8 *port2)
 {
+	bool p1en;
+	bool p2en;
+
+	p1en = tracker->netdev_state[MLX5_LAG_P1].tx_enabled &&
+	       tracker->netdev_state[MLX5_LAG_P1].link_up;
+
+	p2en = tracker->netdev_state[MLX5_LAG_P2].tx_enabled &&
+	       tracker->netdev_state[MLX5_LAG_P2].link_up;
+
 	*port1 = 1;
 	*port2 = 2;
-	if (!tracker->netdev_state[MLX5_LAG_P1].tx_enabled ||
-	    !tracker->netdev_state[MLX5_LAG_P1].link_up) {
-		*port1 = 2;
+	if ((!p1en && !p2en) || (p1en && p2en))
 		return;
-	}
 
-	if (!tracker->netdev_state[MLX5_LAG_P2].tx_enabled ||
-	    !tracker->netdev_state[MLX5_LAG_P2].link_up)
+	if (p1en)
 		*port2 = 1;
+	else
+		*port1 = 2;
 }
 
 void mlx5_modify_lag(struct mlx5_lag *ldev,
-- 
2.31.1