Subject: Re: [PATCH net-next 1/1] net: phy: marvell: Add WAKE_PHY support to WOL event

From: "Russell King (Oracle)" <[email-masked]>
Date: Mon, 16 Aug 2021 11:10:56 +0100

On Fri, Aug 13, 2021 at 04:45:08PM +0800, Song Yoong Siang wrote:
> Add Wake-on-PHY feature support by enabling the Link Up Event.
> 
> Signed-off-by: Song Yoong Siang <[email-masked]>

Hi,

I think this can be greatly simplified - see below.

> ---
>  drivers/net/phy/marvell.c | 39 ++++++++++++++++++++++++++++++++++++---
>  1 file changed, 36 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
> index 3de93c9f2744..415e2a01c151 100644
> --- a/drivers/net/phy/marvell.c
> +++ b/drivers/net/phy/marvell.c
> @@ -155,6 +155,7 @@
>  
>  #define MII_88E1318S_PHY_WOL_CTRL				0x10
>  #define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS		BIT(12)
> +#define MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE		BIT(13)
>  #define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE	BIT(14)
>  
>  #define MII_PHY_LED_CTRL	        16
> @@ -1746,13 +1747,19 @@ static void m88e1318_get_wol(struct phy_device *phydev,
>  {
>  	int ret;
>  
> -	wol->supported = WAKE_MAGIC;
> +	wol->supported = WAKE_MAGIC | WAKE_PHY;
>  	wol->wolopts = 0;
>  
>  	ret = phy_read_paged(phydev, MII_MARVELL_WOL_PAGE,
>  			     MII_88E1318S_PHY_WOL_CTRL);
> -	if (ret >= 0 && ret & MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
> +	if (ret < 0)
> +		return;
> +
> +	if (ret & MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
>  		wol->wolopts |= WAKE_MAGIC;
> +
> +	if (ret & MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE)
> +		wol->wolopts |= WAKE_PHY;
>  }
>  
>  static int m88e1318_set_wol(struct phy_device *phydev,
> @@ -1764,7 +1771,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
>  	if (oldpage < 0)
>  		goto error;
>  
> -	if (wol->wolopts & WAKE_MAGIC) {
> +	if (wol->wolopts & (WAKE_MAGIC | WAKE_PHY)) {
>  		/* Explicitly switch to page 0x00, just to be sure */
>  		err = marvell_write_page(phydev, MII_MARVELL_COPPER_PAGE);
>  		if (err < 0)
> @@ -1796,7 +1803,9 @@ static int m88e1318_set_wol(struct phy_device *phydev,
>  				   MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW);
>  		if (err < 0)
>  			goto error;
> +	}

Wouldn't it make more sense to always select the WOL page at this point
between these two blocks? From what I can see, the WOL page is selected
by both true and false blocks of the next if() statement, and again by
the newly added if() statement for WAKE_PHY.

Other than that, I don't see any issues.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!