Subject: [net-next PATCH 03/13] drivers: net: phy: at803x: enable prefer master for 83xx internal phy

From: Ansuel Smith <[email-masked]>
Date: Thu, 7 Oct 2021 00:35:53 +0200

>From original QCA source code the port was set to prefer master as port
type in 1000BASE-T mode. Apply the same settings also here.

Signed-off-by: Ansuel Smith <[email-masked]>
---
 drivers/net/phy/at803x.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 71237a4e85a3..851d47b8a331 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1325,6 +1325,9 @@ static int qca83xx_config_init(struct phy_device *phydev)
 		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
 				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
 
+	/* Following original QCA sourcecode set port to prefer master */
+	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
+
 	return 0;
 }
 
-- 
2.32.0