Subject: [net-next PATCH 08/13] dt-bindings: net: dsa: qca8k: Add MAC swap and clock phase properties

From: Ansuel Smith <[email-masked]>
Date: Thu, 7 Oct 2021 00:35:58 +0200

Add names and decriptions of additional PORT0_PAD_CTRL properties.
Document new binding qca,mac6_exchange that exchange the mac0 port
with mac6.
qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock
phase to failling edge.

Signed-off-by: Ansuel Smith <[email-masked]>
Signed-off-by: Matthew Hagan <[email-masked]>
---
 Documentation/devicetree/bindings/net/dsa/qca8k.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
index 1f6b7d2f609e..780d1e60c425 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -13,6 +13,9 @@ Required properties:
 Optional properties:
 
 - reset-gpios: GPIO to be used to reset the whole device
+- qca,mac6-exchange: Internally swap MAC0 and MAC6.
+- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge.
+- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
 - qca,rgmii0-1-8v: Set the internal regulator to supply 1.8v for MAC0 port
 - qca,rgmii56-1-8v: Set the internal regulator to supply 1.8v for MAC5/6 port
 
-- 
2.32.0