Subject: [PATCH v4 08/14] net: phy: add qca8081 config_aneg

From: Luo Jie <[email-masked]>
Date: Fri, 22 Oct 2021 20:06:18 +0800

Reuse at803x phy driver config_aneg excepting
adding 2500M auto-negotiation.

Signed-off-by: Luo Jie <[email-masked]>
---
 drivers/net/phy/at803x.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 987497e39e50..8d230e4fd1a3 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1101,7 +1101,30 @@ static int at803x_config_aneg(struct phy_device *phydev)
 			return ret;
 	}
 
-	return genphy_config_aneg(phydev);
+	/* Do not restart auto-negotiation by setting ret to 0 defautly,
+	 * when calling __genphy_config_aneg later.
+	 */
+	ret = 0;
+
+	if (phydev->drv->phy_id == QCA8081_PHY_ID) {
+		int phy_ctrl = 0;
+
+		/* The reg MII_BMCR also needs to be configured for force mode, the
+		 * genphy_config_aneg is also needed.
+		 */
+		if (phydev->autoneg == AUTONEG_DISABLE)
+			genphy_c45_pma_setup_forced(phydev);
+
+		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
+			phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
+
+		ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+				MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
+		if (ret < 0)
+			return ret;
+	}
+
+	return __genphy_config_aneg(phydev, ret);
 }
 
 static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
@@ -1552,6 +1575,7 @@ static struct phy_driver at803x_driver[] = {
 	.set_wol		= at803x_set_wol,
 	.get_wol		= at803x_get_wol,
 	.get_features		= at803x_get_features,
+	.config_aneg		= at803x_config_aneg,
 	.suspend		= genphy_suspend,
 	.resume			= genphy_resume,
 	.read_status		= qca808x_read_status,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project