Subject: [PATCH net-next 01/13] dt-bindings: net: dsa: realtek-smi: remove unsupported switches

From: [email-masked]
Date: Thu, 16 Dec 2021 17:13:30 -0300

From: Luiz Angelo Daros de Luca <[email-masked]>

Remove some switch models that are not cited in the code. Although rtl8366s
was kept, it looks like a stub driver (with a FIXME comment).

Reviewed-by: Arınç ÜNAL <[email-masked]>
Signed-off-by: Luiz Angelo Daros de Luca <[email-masked]>
---
 .../devicetree/bindings/net/dsa/realtek-smi.txt          | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
index 7959ec237983..3a60e77ceed4 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
+++ b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
@@ -4,20 +4,15 @@ Realtek SMI-based Switches
 The SMI "Simple Management Interface" is a two-wire protocol using
 bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does
 not use the MDIO protocol. This binding defines how to specify the
-SMI-based Realtek devices.
+SMI-based Realtek devices. The realtek-smi driver is a platform driver
+and it must be inserted inside a platform node.
 
 Required properties:
 
 - compatible: must be exactly one of:
       "realtek,rtl8365mb" (4+1 ports)
-      "realtek,rtl8366"
       "realtek,rtl8366rb" (4+1 ports)
       "realtek,rtl8366s"  (4+1 ports)
-      "realtek,rtl8367"
-      "realtek,rtl8367b"
-      "realtek,rtl8368s"  (8 port)
-      "realtek,rtl8369"
-      "realtek,rtl8370"   (8 port)
 
 Required properties:
 - mdc-gpios: GPIO line for the MDC clock line.
-- 
2.34.0