Subject: [PATCH AUTOSEL 5.16 052/217] ethernet: renesas: Use div64_ul instead of do_div

From: Sasha Levin <[email-masked]>
Date: Mon, 17 Jan 2022 21:16:55 -0500

From: Yang Li <[email-masked]>

[ Upstream commit d9f31aeaa1e5aefa68130878af3c3513d41c1e2d ]

do_div() does a 64-by-32 division. Here the divisor is an
unsigned long which on some platforms is 64 bit wide. So use
div64_ul instead of do_div to avoid a possible truncation.

Eliminate the following coccicheck warning:
./drivers/net/ethernet/renesas/ravb_main.c:2492:1-7: WARNING:
do_div() does a 64-by-32 division, please consider using div64_ul
instead.

Reported-by: Abaci Robot <[email-masked]>
Signed-off-by: Yang Li <[email-masked]>
Reviewed-by: Geert Uytterhoeven <[email-masked]>
Reviewed-by: Sergey Shtylyov <[email-masked]>
Link: https://lore.kernel.org/r/[email-masked]
Signed-off-by: Jakub Kicinski <[email-masked]>
Signed-off-by: Sasha Levin <[email-masked]>
---
 drivers/net/ethernet/renesas/ravb_main.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index b4c597f4040c8..151cce2fe36d5 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -30,8 +30,7 @@
 #include <linux/spinlock.h>
 #include <linux/sys_soc.h>
 #include <linux/reset.h>
-
-#include <asm/div64.h>
+#include <linux/math64.h>
 
 #include "ravb.h"
 
@@ -2488,8 +2487,7 @@ static int ravb_set_gti(struct net_device *ndev)
 	if (!rate)
 		return -EINVAL;
 
-	inc = 1000000000ULL << 20;
-	do_div(inc, rate);
+	inc = div64_ul(1000000000ULL << 20, rate);
 
 	if (inc < GTI_TIV_MIN || inc > GTI_TIV_MAX) {
 		dev_err(dev, "gti.tiv increment 0x%llx is outside the range 0x%x - 0x%x\n",
-- 
2.34.1