Subject: [PATCH AUTOSEL 5.15 028/188] amd: lance: use eth_hw_addr_set()

From: Sasha Levin <[email-masked]>
Date: Mon, 17 Jan 2022 21:29:12 -0500

From: Jakub Kicinski <[email-masked]>

[ Upstream commit 0222ee53c483df7572eea7ba8585dda59328d46e ]

IO reads, so save to an array then eth_hw_addr_set().

Fixes build on x86 (32bit).

Signed-off-by: Jakub Kicinski <[email-masked]>
Signed-off-by: David S. Miller <[email-masked]>
Signed-off-by: Sasha Levin <[email-masked]>
---
 drivers/net/ethernet/amd/lance.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amd/lance.c b/drivers/net/ethernet/amd/lance.c
index 945bf1d875072..462016666752c 100644
--- a/drivers/net/ethernet/amd/lance.c
+++ b/drivers/net/ethernet/amd/lance.c
@@ -480,6 +480,7 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int
 	unsigned long flags;
 	int err = -ENOMEM;
 	void __iomem *bios;
+	u8 addr[ETH_ALEN];
 
 	/* First we look for special cases.
 	   Check for HP's on-board ethernet by looking for 'HP' in the BIOS.
@@ -541,7 +542,8 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int
 	/* There is a 16 byte station address PROM at the base address.
 	   The first six bytes are the station address. */
 	for (i = 0; i < 6; i++)
-		dev->dev_addr[i] = inb(ioaddr + i);
+		addr[i] = inb(ioaddr + i);
+	eth_hw_addr_set(dev, addr);
 	printk("%pM", dev->dev_addr);
 
 	dev->base_addr = ioaddr;
-- 
2.34.1