Subject: Re: [PATCH 0/9] Add Renesas RZ/V2M Ethernet support

From: Jakub Kicinski <[email-masked]>
Date: Wed, 4 May 2022 17:57:57 -0700

On Wed,  4 May 2022 15:54:45 +0100 Phil Edworthy wrote:
> The RZ/V2M Ethernet is very similar to R-Car Gen3 Ethernet-AVB, though
> some small parts are the same as R-Car Gen2.
> Other differences are:
> * It has separate data (DI), error (Line 1) and management (Line 2) irqs
>   rather than one irq for all three.
> * Instead of using the High-speed peripheral bus clock for gPTP, it has
>   a separate gPTP reference clock.
> 
> The dts patches depend on v4 of the following patch set:
> "Add new Renesas RZ/V2M SoC and Renesas RZ/V2M EVK support"
> 
> Phil Edworthy (9):
>   clk: renesas: r9a09g011: Add eth clock and reset entries
>   dt-bindings: net: renesas,etheravb: Document RZ/V2M SoC
>   ravb: Separate use of GIC reg for PTME from multi_irqs
>   ravb: Separate handling of irq enable/disable regs into feature
>   ravb: Support separate Line0 (Desc), Line1 (Err) and Line2 (Mgmt) irqs
>   ravb: Use separate clock for gPTP
>   ravb: Add support for RZ/V2M
>   arm64: dts: renesas: r9a09g011: Add ethernet nodes
>   arm64: dts: renesas: rzv2m evk: Enable ethernet

How are you expecting this to be merged?

I think you should drop the first (clk) patch from this series 
so we can apply the series to net-next. And route the clk patch 
thru Geert's tree separately? 

Right now patchwork thinks the series is incomplete because it 
hasn't received patch 1.